Yo lm-sesors!
See below for a working sensors3.conf file for the Supermicro X8DTN
motherboard.
How do I get it posted on the wiki for others to use?
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
gem@xxxxxxxxxx Tel:+1(541)382-8588
# /etc/sensors.d/X8DTN
# settings for the supermicro X8DTN
# originally written by Gary E. Miller <gem@xxxxxxxxxx>
# use at your own risk !
# Date: 25 May 2012
# Here's the info as supplied by Supermicro:
#
# Bus Type = ISAIO/SMBus
# One W83795AG
#
# Windbond W83795AG, Slave Address=0x2f (0x5E in 8-Bit format)
# =============================================================
# Fan1 Fan Speed, Offset 0x2e RPM = 84375/Data
# Fan2 Fan Speed, Offset 0x2f RPM = 84375/Data
# Fan3 Fan Speed, Offset 0x30 RPM = 84375/Data
# Fan4 Fan Speed, Offset 0x31 RPM = 84375/Data
# Fan5 Fan Speed, Offset 0x32 RPM = 84375/Data
# Fan6 Fan Speed, Offset 0x33 RPM = 84375/Data
# Fan7 Fan Speed, Offset 0x34 RPM = 84375/Data
# Fan8 Fan Speed, Offset 0x35 RPM = 84375/Data
# CPU1 Voltage, Offset 0x10 Voltage = Data* 0.008
# CPU2 Voltage, Offset 0x11 Voltage = Data* 0.008
# +1.5V Voltage, Offset 0x12 Voltage = Data* 0.008
# +5V Voltage, Offset 0x13 Voltage = Data* 0.008 * (40/10)
# +12V Voltage, Offset 0x14 Voltage = Data* 0.008/ (10./66.2)
# +5VSB Voltage, Offset 0x15 Voltage = Data* 0.008 * (40/10)
# +3.3V Voltage, Offset 0x1c Voltage = Data* 0.024
# +3.3VSB Voltage, Offset 0x1d Voltage = Data* 0.024
# Battery Voltage, Offset 0x1e Voltage = Data* 0.024
# CPU1 Temperature, Offset 0x27 Temperature = Data
# CPU2 Temperature, Offset 0x26 Temperature = Data
# System Temperature, Offset 0x1f Temperature = Data
# Chassis Intrusion, Bank 0, Offset 0x46, BitMask 0x40 1 = Bad, 0 = Good
# (Clear Bit: Bank 0, Offset 0x4d, BitMask 0x80)
#
#
# Power Supply Failure, GP11(From W83627HF) 1 = Good, 0 = Bad
chip "w83627hf-isa-0a00"
# I'm not sure which is GP11, so I turned off everything.
ignore in0
ignore in1
ignore in2
ignore in3
ignore in4
ignore in5
ignore in6
ignore in7
ignore in8
ignore cpu0_vid
ignore fan1
ignore fan2
ignore fan3
ignore temp1
ignore temp2
ignore temp3
bus "i2c-0" "SMBus I801 adapter at 0400"
chip "w83795adg-i2c-0-2f"
# Voltages ; note that in the table above, the .008 and .024 factors are
# already computed in the driver...
label in0 "CPU1"
label in1 "CPU2"
label in2 "+1.5V"
label in3 "+5V"
label in4 "+12V"
label in5 "5VSB"
label in11 "Vtt"
label in12 "+3.3V"
label in13 "3VSB"
label in14 "Vbat"
compute in3 @*4, @/4
compute in4 @*6.62, @/6.62
compute in5 @*4, @/4
compute in6 @*3, @/3
label temp3 "unused"
label temp4 "unused"
label temp5 "mobo"
label temp7 "CPU1"
label temp8 "CPU2"
ignore in6
ignore in7
ignore in11
ignore temp3
ignore temp4
ignore fan4
ignore fan5
ignore fan6
ignore fan7
ignore fan8
set in0_min 0.82
set in0_max 1.35
set in1_min 0.82
set in1_max 1.35
set in12_min 3.3 * 0.90
set in12_max 3.3 * 1.10
set in13_min 3.3 * 0.90
set in13_max 3.3 * 1.10
set in14_min 3.0 * 0.90
set in14_max 3.3 * 1.10
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
