Re: [PATCH] hwmon: Generic ADC support for hwmon

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/15/2012 3:18 PM, Lars-Peter Clausen wrote:
On 05/15/2012 03:42 PM, Guenter Roeck wrote:
On Tue, May 15, 2012 at 08:42:57AM -0400, R, Durgadoss wrote:
Hi Guenter,

Thanks for a quick reply.

On Tue, May 15, 2012 at 10:26:48AM -0400, Jenny TC wrote:
Currently drivers are using custom APIs to communicate with ADC driver.
So it make sense to have generic APIs to commnicate with ADC drivers.
This patch introduces generic APIs to communicate with ADC drivers.

Signed-off-by: Jenny TC<jenny.tc@xxxxxxxxx>

Hi Jenny,

Do you have a practical use case ?

We have some platform specific component drivers, thermal drivers,
battery drivers using this General purpose ADC in the platform.
That's why we thought of doing something like this.


Also, shouldn't those generic ADCs rather be supported through the IO
subsystem ?
After all, hwmon is all about hardware monitoring, not to provide generic ADC
access.

In this case, can we try this in iio or mfd subsystem ?
Kindly advise.

I meant iio (more specifically staging/iio/adc).

I suspect it might make more sense to have a hwmon client, in parallel to the other
users/clients (battery control, thermal etc), if the values reported by the ADC reflect
information relevant for hardware monitoring.


So there is already an experimental IIO to hwmon bridge in
drivers/staging/iio/, which you can use to expose a IIO ADC driver as an
hwmon device.
Thanks Lars-Peter. That bridge is currently limited to voltage reading but that's more because my test part didn't do anything else.
Trivial to add other bits and bobs as needed.  In the short term, the
interrupt driven side of things is still under review (so you are limited to polling devices - though this is typically fine for hwmon etc). I'll be submitting a patch to move the existing hwmon bridge driver into drivers/hwmon in the next cycle (after the IIO core is out of staging).

Longer term plans involve reducing the connection between the IIO
userspace front end and the backend to give cleaner support when
people don't want generic userspace interfaces.  This means making
absolutely everything under the sun available through generic in kernel
interfaces which will be 'interesting' for some more interesting devices...

Jonathan

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux