|
Hi list
How can I set sensor limits to an Asus m4a89gtd pro usb3 board using Debian/Squeeze? The sensors output looks reasonable (compared to the BIOS values) . What I'm missing is critical limits for the fan speeds in case of 0 RPM. I forced the chassis fan to stop, got 0 RPM but no ALARM output. I assume the crit value is missing. Usually I set this in a /etc/sensors.d/<configfile> Now this fails, because sensors3.conf does not show an entry for atk0110-* and I can't create one myself that is successfully parsed by sensors -s -c <configfile> ~$ sensors --version sensors version 3.1.2 with libsensors version 3.1.2 ~$ uname -r 2.6.32-5-686 ~$ sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +15.0°C (high = +70.0°C, crit = +90.0°C) atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.07 V (min = +0.80 V, max = +1.60 V) +3.3V Voltage: +3.29 V (min = +2.97 V, max = +3.63 V) +5V Voltage: +4.97 V (min = +4.50 V, max = +5.50 V) +12V Voltage: +12.07 V (min = +10.20 V, max = +13.80 V) CPU Fan Speed: 1537 RPM (min = 600 RPM) Chassis Fan Speed: 1467 RPM (min = 600 RPM) Chassis2 Fan Speed: 0 RPM (min = 600 RPM) Power Fan Speed: 0 RPM (min = 600 RPM) CPU Temperature: +24.0°C (high = +60.0°C, crit = +95.0°C) MB Temperature: +23.0°C (high = +45.0°C, crit = +75.0°C) Should I rebuild libsensors / try a newer kernel / create the config file in a different way? What's the right thing to do here? |
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
