I have had in mind CPUTIN which is showing in lm-sensors -60 Celsius.
( it is all described more detailed in my previous posts.)
Just small info :-)
( it is all described more detailed in my previous posts.)
Just small info :-)
On Fri, Apr 20, 2012 at 4:22 PM, Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> wrote:
On Fri, 2012-04-20 at 06:47 -0400, Martin Suchanek wrote:Martin,
> Hi,
>
> Add info:
> I have found software called open hardware monitor. I have been
> testing it in windows for couple of days and it works properly with
> Nuvoton NST6776F chip. I have been comparing results with AI Suite
> software coming from ASUS and results are corresponding and measuring
> is with big precise. So , you can have a look to source code and
> compare with your driver. This software should work on linux as well
> but I did not try it yet but I will.
>
> (I did not tried your experimental driver yet but I will)
>
please don't top-post.
What is the output you get with open hardware monitor ? They report four
temperatures, PECI_0, CPUTIN, AUXTIN, and SYSTIN.
Thanks,
Guenter
> Regards,
> Martin
>
>
> On Sat, Apr 14, 2012 at 2:09 PM, Martin Suchanek
> <martin.suc@xxxxxxxxxxxxxx> wrote:
> Hi,
>
> I have found for long time ago that CPUTIN temperature is not
> showed correctly by sensors command:
>
> coretemp-isa-0000
> Adapter: ISA adapter
> Physical id 0: +34.0°C (high = +80.0°C, crit = +98.0°C)
> Core 0: +30.0°C (high = +80.0°C, crit = +98.0°C)
> ...
> nct6776-isa-0290
> Adapter: ISA adapter
> ...
> CPUTIN: -60.0°C (high = +80.0°C, hyst = +75.0°C)
> sensor = diode
> ...
>
> I have cheked it in BIOS and in AI Suite in windows 7 64 bit
> and consulted it with ASUS technical support and everything is
> working properly.
> So , hardware is fine. Software in windows is fine. Only linux
> software is not correct.
> I have tried to detect-sensor many times and it is still the
> same.
> If there is some kind of tweak in config please let me know
> but it seems to me there is something wrong with lm-sensors
> 3.3.1.
>
> ...
> Intel digital thermal sensor...
> Success!
> (driver `coretemp')
> ...
> Found `Nuvoton NCT6776F Super IO Sensors'
> Success!
> ...
> Driver `w83627ehf':
> * ISA bus, address 0x290
> Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)
>
> Driver `coretemp':
> * Chip `Intel digital thermal sensor' (confidence: 9)
> ...
>
> my /etc/modules:
> ...
> coretemp
> w83627ehf
> ...
>
> This error have appeared on maximus iv extreme motherboard
> Revision 3 , BIOS from 1404 to 3202 (latest)
> linux ubuntu natty -> oneiric 64 bit kernel from 2.6.39 up to
> 3.0.0-19 commercial version (tested on 3.3.1 compiled by me)
>
> Could you please help me to solve it ?
>
> Thank you very much for any clue.
> Kind Regards,
> Martin
>
>
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
