I have a Gigabyte H67N-USB3-B3 motherboard and am having some problems
getting lm_sensors to work fully on it.
I downloaded the driver and the latest sensors-detect from the
lm_sensors website to ensure I had the latest version.
sensors-detect reports:
Trying family `ITE'... Yes
Found `ITE IT8728F Super IO Sensors' Success!
(address 0x290, driver `it87')
However it still doesn't load automatically on boot and a manual
"modprobe it87" reveals:
FATAL: Error inserting it87
(/lib/modules/3.1.6-server-69mib/kernel/drivers/hwmon/it87.ko.gz): No
such device
So I found a note somewhere that "modprobe it87 force_id=0x8721" forces
it to work, but then I get the following from sensors:
it8721-isa-0290
Adapter: ISA adapter
in0: +1.04 V (min = +0.00 V, max = +3.06 V)
in1: +0.14 V (min = +0.00 V, max = +3.06 V)
in2: +2.89 V (min = +0.00 V, max = +3.06 V)
+3.3V: +3.31 V (min = +0.00 V, max = +6.12 V)
in4: +0.02 V (min = +0.00 V, max = +3.06 V)
in5: +1.01 V (min = +0.00 V, max = +3.06 V)
in6: +1.54 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.38 V (min = +0.00 V, max = +6.12 V)
Vbat: +3.17 V
fan1: 1198 RPM (min = 0 RPM)
fan2: 896 RPM (min = 0 RPM)
temp1: +43.0°C (low = +127.0°C, high = +127.0°C) sensor =
thermistor
temp2: +45.0°C (low = +127.0°C, high = +127.0°C) sensor =
thermistor
temp3: +31.0°C (low = +127.0°C, high = +127.0°C) sensor =
thermistor
intrusion0: ALARM
The problem is that I am not getting any output for +12V, +5V or +5VSB,
which are the main reason I want to use the monitoring.
I am also not sure how to identify which of the above is the VCore (I
suspect its in0), although that is less important to me.
Do you have any suggestions/fixes?
Alex.
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
