On Mon, 26 Mar 2012 12:21:25 -0800, Glenn Hollowell wrote: > > Thanks Jean and Guenter, see below for SENSORS -version and -detect. gh > > user@dfdot-user1:~> sensors -v > sensors version 3.3.2 with libsensors version 3.3.2 > user@dfdot-user1:~> sensors-detect > # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) > # System: To Be Filled By O.E.M. To Be Filled By O.E.M. [To Be Filled By > O.E.M.] > # Board: ASRock 880G Extreme3 > (...) > Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-3) > Do you want to scan it? (yes/NO/selectively): yes > Client found at address 0x50 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... Yes > (confidence 8, not a hardware monitoring chip) > Probing for `EDID EEPROM'... No > Client found at address 0x51 > Probing for `Analog Devices ADM1033'... No > Probing for `Analog Devices ADM1034'... No > Probing for `SPD EEPROM'... Yes > (confidence 8, not a hardware monitoring chip) No extra hardware monitoring chip found I'm afraid, which suggests multiplexed fan input pin. Which we can't support without detailed board schematics which you'll most likely never obtain from the vendor. And even then, supporting that would be a mess. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
