[PATCH] hwmon: (adm1031) Fix compiler warning

[Guenter Roeck <linux@xxxxxxxxxxxx>]

Some configurations produce the following compile warning:

drivers/hwmon/adm1031.c: In function 'set_fan_auto_channel':
drivers/hwmon/adm1031.c:292: warning: 'reg' may be used uninitialized in this function

While this is a false positive, it can easily be fixed by overloading the return
value from get_fan_auto_nearest with both register value and error return code
(the register value is never negative). Coincidentially, that also reduces
module size by a few bytes.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
 drivers/hwmon/adm1031.c |   21 ++++++++-------------
 1 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index ff37363..c58acb4 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -233,18 +233,15 @@ static const auto_chan_table_t auto_channel_select_table_adm1030 = {
  * nearest match if no exact match where found.
  */
 static int
-get_fan_auto_nearest(struct adm1031_data *data,
-		     int chan, u8 val, u8 reg, u8 *new_reg)
+get_fan_auto_nearest(struct adm1031_data *data, int chan, u8 val, u8 reg)
 {
 	int i;
 	int first_match = -1, exact_match = -1;
 	u8 other_reg_val =
 	    (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];
 
-	if (val == 0) {
-		*new_reg = 0;
+	if (val == 0)
 		return 0;
-	}
 
 	for (i = 0; i < 8; i++) {
 		if ((val == (*data->chan_select_table)[i][chan]) &&
@@ -264,13 +261,11 @@ get_fan_auto_nearest(struct adm1031_data *data,
 	}
 
 	if (exact_match >= 0)
-		*new_reg = exact_match;
+		return exact_match;
 	else if (first_match >= 0)
-		*new_reg = first_match;
-	else
-		return -EINVAL;
+		return first_match;
 
-	return 0;
+	return -EINVAL;
 }
 
 static ssize_t show_fan_auto_channel(struct device *dev,
@@ -301,10 +296,10 @@ set_fan_auto_channel(struct device *dev, struct device_attribute *attr,
 
 	mutex_lock(&data->update_lock);
 
-	ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg);
-	if (ret) {
+	reg = get_fan_auto_nearest(data, nr, val, data->conf1);
+	if (reg < 0) {
 		mutex_unlock(&data->update_lock);
-		return ret;
+		return reg;
 	}
 	data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
 	if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^
-- 
1.7.5.4


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors