Hi, I'm trying to get my DH55HC's sensors working. Detection indicates w83627dhg-isa-0a10 as the device. According to the wiki at <http://lm-sensors.org/wiki/VoltageLabelsAndScaling>, this chip is capable of reading 8 mV/LSb. Here's the problem: the division ratio doesn't make sense! In the BIOS, I observed the following values on the 12 V rail: 11.828 11.844 11.859 The difference between these values is 15 or 16 mV. But 12 V / 0.016 V/LSb = 750 LSb! Since these sensor chips don't read raw values above 255, how in the world am I getting 16 mV resolution on a 12 V input? I'm seeing similar results on my 5 V rail, which returns values just 2 mV apart in the BIOS, and on my so-called "Memory V_SM" rail (2 mV) and "+Vccp" rail (differences as small as 1 mV being displayed). Any ideas? Chris _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
