2012/3/8 Guenter Roeck <linux@xxxxxxxxxxxx>:
> Assume all three are compatible and have the same functionality.
>
> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Tested-by: Bjoern Gerhart <oss@xxxxxxxxxxxxx>
> ---
> This patch depends on the other pending changes for the it87 driver in my
> hwmon-next tree.
>
> Documentation/hwmon/it87 | 24 +++++++----
> drivers/hwmon/it87.c | 93 ++++++++++++++++++++++++++++++++++++++++++----
> 2 files changed, 100 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
> index 23b7def..b0c1dcd 100644
> --- a/Documentation/hwmon/it87
> +++ b/Documentation/hwmon/it87
> @@ -30,6 +30,10 @@ Supported chips:
> Prefix: 'it8728'
> Addresses scanned: from Super I/O config space (8 I/O ports)
> Datasheet: Not publicly available
> + * IT8781F/IT8782F/IT8783E/F
> + Prefix: 'it8783'
> + Addresses scanned: from Super I/O config space (8 I/O ports)
> + Datasheet: Not publicly available
> * SiS950 [clone of IT8705F]
> Prefix: 'it87'
> Addresses scanned: from Super I/O config space (8 I/O ports)
> @@ -75,7 +79,8 @@ Description
> -----------
>
> This driver implements support for the IT8705F, IT8712F, IT8716F,
> -IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips.
> +IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F,
> +IT8783E/F, and SiS950 chips.
>
> These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
> joysticks and other miscellaneous stuff. For hardware monitoring, they
> @@ -99,11 +104,11 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
> have support for 2 additional fans. The additional fans are supported by the
> driver.
>
> -The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and
> -IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This
> -is better (no more fan clock divider mess) but not compatible with the older
> -chips and revisions. The 16-bit tachometer mode is enabled by the driver when
> -one of the above chips is detected.
> +The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F,
> +and late IT8712F and IT8705F also have optional 16-bit tachometer counters for
> +fans 1 to 3. This is better (no more fan clock divider mess) but not compatible
> +with the older chips and revisions. The 16-bit tachometer mode is enabled by the
> +driver when one of the above chips is detected.
>
> The IT8726F is just bit enhanced IT8716F with additional hardware
> for AMD power sequencing. Therefore the chip will appear as IT8716F
> @@ -131,9 +136,10 @@ inputs can measure voltages between 0 and 4.08 volts, with a resolution of
> 0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
> voltage in8 does not have limit registers.
>
> -On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
> -the chip (in7, in8 and optionally in3). The driver handles this transparently
> -so user-space doesn't have to care.
> +On the IT8721F/IT8758E/IT8781F/IT8782F/IT8783E/F, some voltage inputs are
> +internal and scaled inside the chip (in7 (optional for IT8781/2/3), in8 and
> +optionally in3). The driver handles this transparently so user-space doesn't
> +have to care.
>
> The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
> the voltage level your processor should work with. This is hardcoded by
> diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
> index 0b204e4..afaf19b 100644
> --- a/drivers/hwmon/it87.c
> +++ b/drivers/hwmon/it87.c
> @@ -19,6 +19,9 @@
> * IT8726F Super I/O chip w/LPC interface
> * IT8728F Super I/O chip w/LPC interface
> * IT8758E Super I/O chip w/LPC interface
> + * IT8781F Super I/O chip w/LPC interface
> + * IT8782F Super I/O chip w/LPC interface
> + * IT8783E/F Super I/O chip w/LPC interface
> * Sis950 A clone of the IT8705F
> *
> * Copyright (C) 2001 Chris Gauthron
> @@ -59,7 +62,7 @@
>
> #define DRVNAME "it87"
>
> -enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728 };
> +enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8783 };
>
> static unsigned short force_id;
> module_param(force_id, ushort, 0);
> @@ -137,13 +140,19 @@ static inline void superio_exit(void)
> #define IT8721F_DEVID 0x8721
> #define IT8726F_DEVID 0x8726
> #define IT8728F_DEVID 0x8728
> +#define IT8781F_DEVID 0x8781
> +#define IT8782F_DEVID 0x8782
> +#define IT8783E_DEVID 0x8783
> #define IT87_ACT_REG 0x30
> #define IT87_BASE_REG 0x60
>
> /* Logical device 7 registers (IT8712F and later) */
> +#define IT87_SIO_GPIO1_REG 0x25
> #define IT87_SIO_GPIO3_REG 0x27
> #define IT87_SIO_GPIO5_REG 0x29
> +#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */
> #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
> +#define IT87_SIO_SPI_REG 0xef /* SPI function pin select */
> #define IT87_SIO_VID_REG 0xfc /* VID value */
> #define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
>
> @@ -313,8 +322,12 @@ static u8 in_to_reg(const struct it87_data *data, int nr, long val)
> lsb = 24;
> else
> lsb = 12;
> - } else
> - lsb = 16;
> + } else {
> + if (data->in_scaled & (1 << nr))
> + lsb = 32;
> + else
> + lsb = 16;
> + }
>
> val = DIV_ROUND_CLOSEST(val, lsb);
> return SENSORS_LIMIT(val, 0, 255);
> @@ -327,8 +340,12 @@ static int in_from_reg(const struct it87_data *data, int nr, int val)
> return val * 24;
> else
> return val * 12;
> - } else
> - return val * 16;
> + } else {
> + if (data->in_scaled & (1 << nr))
> + return val * 32;
> + else
> + return val * 16;
> + }
> }
>
> static inline u8 FAN_TO_REG(long rpm, int div)
> @@ -407,7 +424,8 @@ static inline int has_16bit_fans(const struct it87_data *data)
> || data->type == it8718
> || data->type == it8720
> || data->type == it8721
> - || data->type == it8728;
> + || data->type == it8728
> + || data->type == it8783;
> }
>
> static inline int has_old_autopwm(const struct it87_data *data)
> @@ -1651,6 +1669,11 @@ static int __init it87_find(unsigned short *address,
> case IT8728F_DEVID:
> sio_data->type = it8728;
> break;
> + case IT8781F_DEVID:
> + case IT8782F_DEVID:
> + case IT8783E_DEVID:
> + sio_data->type = it8783;
> + break;
> case 0xffff: /* No device at all */
> goto exit;
> default:
> @@ -1686,6 +1709,54 @@ static int __init it87_find(unsigned short *address,
> /* The IT8705F has a different LD number for GPIO */
> superio_select(5);
> sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
> + } else if (sio_data->type == it8783) {
> + int reg25, reg27, reg2A, reg2C, regEF;
> +
> + sio_data->skip_vid = 1; /* No VID */
> +
> + superio_select(GPIO);
> +
> + reg25 = superio_inb(IT87_SIO_GPIO1_REG);
> + reg27 = superio_inb(IT87_SIO_GPIO3_REG);
> + reg2A = superio_inb(IT87_SIO_PINX1_REG);
> + reg2C = superio_inb(IT87_SIO_PINX2_REG);
> + regEF = superio_inb(IT87_SIO_SPI_REG);
> +
> + /* Check if fan3 is there or not */
> + if ((reg27 & (1 << 0)) || !(reg2C & (1 << 2)))
> + sio_data->skip_fan |= (1 << 2);
> + if ((reg25 & (1 << 4))
> + || (!(reg2A & (1 << 1)) && (regEF & (1 << 0))))
> + sio_data->skip_pwm |= (1 << 2);
> +
> + /* Check if fan2 is there or not */
> + if (reg27 & (1 << 7))
> + sio_data->skip_fan |= (1 << 1);
> + if (reg27 & (1 << 3))
> + sio_data->skip_pwm |= (1 << 1);
> +
> + /* VIN5 */
> + if ((reg27 & (1 << 0)) || (reg2C & (1 << 2)))
> + ; /* No VIN5 */
> +
> + /* VIN6 */
> + if ((reg27 & (1 << 1)) || (reg2C & (1 << 2)))
> + ; /* No VIN6 */
> +
> + /*
> + * VIN7
> + * Does not depend on bit 2 of Reg2C, contrary to datasheet.
> + */
> + if (reg27 & (1 << 2))
> + ; /* No VIN7 */
> +
> + if (reg2C & (1 << 0))
> + sio_data->internal |= (1 << 0);
> + if (reg2C & (1 << 1))
> + sio_data->internal |= (1 << 1);
> +
> + sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
> +
> } else {
> int reg;
>
> @@ -1823,6 +1894,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
> "it8720",
> "it8721",
> "it8728",
> + "it8783",
> };
>
> res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> @@ -1867,6 +1939,11 @@ static int __devinit it87_probe(struct platform_device *pdev)
> data->in_scaled |= (1 << 7); /* in7 is VSB */
> if (sio_data->internal & (1 << 2))
> data->in_scaled |= (1 << 8); /* in8 is Vbat */
> + } else if (sio_data->type == it8783) {
> + if (sio_data->internal & (1 << 0))
> + data->in_scaled |= (1 << 3); /* in3 is VCC5V */
> + if (sio_data->internal & (1 << 1))
> + data->in_scaled |= (1 << 7); /* in7 is VCCH5V */
> }
>
> /* Initialize the IT87 chip */
> @@ -2143,8 +2220,8 @@ static void __devinit it87_init_device(struct platform_device *pdev)
> it87_write_value(data, IT87_REG_FAN_16BIT,
> tmp | 0x07);
> }
> - /* IT8705F only supports three fans. */
> - if (data->type != it87) {
> + /* IT8705F and IT8783E/F only support three fans. */
> + if (data->type != it87 && data->type != it8783) {
> if (tmp & (1 << 4))
> data->has_fan |= (1 << 3); /* fan4 enabled */
> if (tmp & (1 << 5))
> --
> 1.7.5.4
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
