TPS40400 and TPS40422 are supported by the generic PMBus driver. Add device IDs and data sheet references. Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Documentation/hwmon/pmbus | 6 ++++++ drivers/hwmon/pmbus/Kconfig | 2 +- drivers/hwmon/pmbus/pmbus.c | 2 ++ 3 files changed, 9 insertions(+), 1 deletions(-) diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index d28b591..c2b157b 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -22,6 +22,12 @@ Supported chips: http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf + * Texas Instruments TPS40400, TPS40422 + Prefixes: 'tps40400', 'tps40422' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/tps40400 + http://www.ti.com/lit/gpn/tps40422 * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index cfec923..7968c81 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -20,7 +20,7 @@ config SENSORS_PMBUS help If you say yes here you get hardware monitoring support for generic PMBus devices, including but not limited to ADP4000, BMR453, BMR454, - NCP4200, and NCP4208. + NCP4200, NCP4208, TPS40400, and TPS40422. This driver can also be built as a module. If so, the module will be called pmbus. diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 3488740..7d5161d 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -191,6 +191,8 @@ static const struct i2c_device_id pmbus_id[] = { {"pdt006", 1}, {"pdt012", 1}, {"pmbus", 0}, + {"tps40400", 1}, + {"tps40422", 2}, {"udt020", 1}, {} }; -- 1.7.5.4 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
