Hi,
i have a arm mx28 board with a couple of ads1015,
i have ported the driver from:
"[PATCH v4] hwmon: Add support for Texas Instruments ADS1015"
to my kernel 2.6.35.3
when i boot the board and probe the two modules hwmon.ko and ads1015.ko nothing
happens.
with i2cdump i see the chips,i am sure of this because the default values for
some registers are 0x8583, 0x8000 and 0x7fff.
sample output for one chip:
root@picomaster ~$ i2cdump 0 0x48 w
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x48, mode word
Continue? [Y/n]
0,8 1,9 2,a 3,b 4,c 5,d 6,e 7,f
00: 0000 8385 0080 ff7f 0000 8385 0080 XXXX
08: 0000 8385 0080 ff7f 0000 8385 0080 XXXX
On sysfs i see this:
root@picomaster ~$ find /sys/ | grep ads1015
/sys/bus/i2c/drivers/ads1015
/sys/bus/i2c/drivers/ads1015/module
/sys/bus/i2c/drivers/ads1015/uevent
/sys/bus/i2c/drivers/ads1015/unbind
/sys/bus/i2c/drivers/ads1015/bind
/sys/module/hwmon/holders/ads1015
/sys/module/ads1015
/sys/module/ads1015/holders
/sys/module/ads1015/initstate
/sys/module/ads1015/refcnt
/sys/module/ads1015/sections
/sys/module/ads1015/sections/.text
/sys/module/ads1015/sections/.exit.text
/sys/module/ads1015/sections/.init.text
/sys/module/ads1015/sections/.rodata
/sys/module/ads1015/sections/.rodata.str1.1
/sys/module/ads1015/sections/.data
/sys/module/ads1015/sections/.gnu.linkonce.this_module
/sys/module/ads1015/sections/.note.gnu.build-id
/sys/module/ads1015/sections/.symtab
/sys/module/ads1015/sections/.strtab
/sys/module/ads1015/notes
/sys/module/ads1015/notes/.note.gnu.build-id
/sys/module/ads1015/drivers
/sys/module/ads1015/drivers/i2c:ads1015
root@picomaster ~$ find /sys/module/hwmon/
/sys/module/hwmon/
/sys/module/hwmon/holders
/sys/module/hwmon/holders/ads1015
/sys/module/hwmon/initstate
/sys/module/hwmon/refcnt
/sys/module/hwmon/sections
/sys/module/hwmon/sections/.text
/sys/module/hwmon/sections/.exit.text
/sys/module/hwmon/sections/.init.text
/sys/module/hwmon/sections/__ksymtab_strings
/sys/module/hwmon/sections/__kcrctab_gpl
/sys/module/hwmon/sections/.rodata.str1.1
/sys/module/hwmon/sections/__ksymtab_gpl
/sys/module/hwmon/sections/.gnu.linkonce.this_module
/sys/module/hwmon/sections/.note.gnu.build-id
/sys/module/hwmon/sections/.bss
/sys/module/hwmon/sections/.symtab
/sys/module/hwmon/sections/.strtab
/sys/module/hwmon/notes
/sys/module/hwmon/notes/.note.gnu.build-id
I expect to have the inputs value to sysfs, according to source something like
that: /sys/.../ads1015/in_0_input
Maybe i am missing something, please help me.
Thanks, Pierantonio.
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
