From: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/lm80.c | 32 +++++++++++++++++++-------------
1 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 6a2a777..a996f27 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -1,8 +1,8 @@
/*
* lm80.c - From lm_sensors, Linux kernel modules for hardware
- * monitoring
+ * monitoring
* Copyright (C) 1998, 1999 Frodo Looijaard <frodol@xxxxxx>
- * and Philip Edelbrock <phil@xxxxxxxxxxxxx>
+ * and Philip Edelbrock <phil@xxxxxxxxxxxxx>
*
* Ported to Linux 2.6 by Tiago Sousa <mirage@xxxxxxxxxx>
*
@@ -61,10 +61,12 @@ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
#define LM80_REG_RES 0x06
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
+/*
+ * Conversions. Rounding and limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ * Fixing this is just not worth it.
+ */
#define IN_TO_REG(val) (SENSORS_LIMIT(((val) + 5) / 10, 0, 255))
#define IN_FROM_REG(val) ((val) * 10)
@@ -242,10 +244,12 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
return count;
}
-/* Note: we save and restore the fan minimum here, because its value is
- determined in part by the fan divisor. This follows the principle of
- least surprise; the user doesn't expect the fan minimum to change just
- because the divisor changed. */
+/*
+ * Note: we save and restore the fan minimum here, because its value is
+ * determined in part by the fan divisor. This follows the principle of
+ * least surprise; the user doesn't expect the fan minimum to change just
+ * because the divisor changed.
+ */
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -574,9 +578,11 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value)
/* Called when we have found a new LM80. */
static void lm80_init_client(struct i2c_client *client)
{
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others. This makes most other
- initializations unnecessary */
+ /*
+ * Reset all except Watchdog values and last conversion values
+ * This sets fan-divs to 2, among others. This makes most other
+ * initializations unnecessary
+ */
lm80_write_value(client, LM80_REG_CONFIG, 0x80);
/* Set 11-bit temperature resolution */
lm80_write_value(client, LM80_REG_RES, 0x08);
--
1.7.3.1
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
