On Mon, 23 Jan 2012 08:35:22 -0800, Guenter Roeck wrote:
> Cc: Mike Gorchak <lestat@xxxxxxxx>
> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> v2:
> - Drop reference to G781-1; we don't usually mention chip variants
> - Accept device ID 0x01 on address 0x4c as well as 0x4d
> - Do not accept device ID 0x03, as its existence is not confirmed
>
> CHANGES | 1 +
> prog/detect/sensors-detect | 14 +++++++++++++-
> 2 files changed, 14 insertions(+), 1 deletions(-)
>
> diff --git a/CHANGES b/CHANGES
> index c776e84..c41f489 100644
> --- a/CHANGES
> +++ b/CHANGES
> @@ -15,6 +15,7 @@ SVN HEAD
> Fix loading of the cpuid module
> Make LM73 detection less problematic
> Add detection of National Semiconductor LM96163
> + Add detection of GMT G781
>
> 3.3.1 (2011-07-21)
> isadump: Add support for word (16-bit) and long (32-bit) reads
> diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
> index 31a4619..60192b4 100755
> --- a/prog/detect/sensors-detect
> +++ b/prog/detect/sensors-detect
> @@ -818,6 +818,11 @@ use vars qw(@i2c_adapter_names);
> i2c_addrs => [0x18..0x1a, 0x29..0x2b, 0x4c..0x4e],
> i2c_detect => sub { adm1021_detect(@_, 1); },
> }, {
> + name => "Global Mixed-mode Technology G781",
> + driver => "lm90",
> + i2c_addrs => [0x4c, 0x4d],
> + i2c_detect => sub { lm90_detect(@_, 15); },
> + }, {
> name => "Maxim MAX1617",
> driver => "adm1021",
> i2c_addrs => [0x18..0x1a, 0x29..0x2b, 0x4c..0x4e],
> @@ -4364,7 +4369,8 @@ sub max6680_95_detect
> # 6 = MAX6646/MAX6647/MAX6648/MAX6649/MAX6692,
> # 8 = W83L771W/G, 9 = TMP401, 10 = TMP411,
> # 11 = W83L771AWG/ASG, 12 = MAX6690,
> -# 13 = ADT7461A/NCT1008, 14 = SA56004
> +# 13 = ADT7461A/NCT1008, 14 = SA56004,
> +# 15 = G781
> # Registers used:
> # 0x03: Configuration
> # 0x04: Conversion rate
> @@ -4476,6 +4482,12 @@ sub lm90_detect
> return if $mid != 0xa1; # NXP Semiconductor/Philips
> return 6 if $cid == 0x00; # SA56004
> }
> + if ($chip == 15) {
> + return if ($conf & 0x3f) != 0;
> + return if $rate > 0x08;
> + return if $mid != 0x47; # GMT
> + return 8 if $cid == 0x01; # G781
> + }
> return;
> }
>
Looks very good now, please commit.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
