Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/sht15.c | 50 ++++++++++++++++++++++++------------------------
1 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 46af605..54f762b 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -60,7 +60,7 @@ enum sht15_state {
SHT15_READING_HUMID
};
-/**
+/*
* struct sht15_temppair - elements of voltage dependent temp calc
* @vdd: supply voltage in microvolts
* @d1: see data sheet
@@ -115,7 +115,7 @@ static const u8 sht15_crc8_table[] = {
59, 10, 89, 104, 255, 206, 157, 172
};
-/**
+/*
* struct sht15_data - device instance specific data
* @pdata: platform data (gpio's etc).
* @read_work: bh of interrupt handler.
@@ -169,7 +169,7 @@ struct sht15_data {
atomic_t interrupt_handled;
};
-/**
+/*
* sht15_reverse() - reverse a byte
* @byte: byte to reverse.
*/
@@ -182,7 +182,7 @@ static u8 sht15_reverse(u8 byte)
return c;
}
-/**
+/*
* sht15_crc8() - compute crc8
* @data: sht15 specific data.
* @value: sht15 retrieved data.
@@ -203,7 +203,7 @@ static u8 sht15_crc8(struct sht15_data *data,
return crc;
}
-/**
+/*
* sht15_connection_reset() - reset the comms interface
* @data: sht15 specific data
*
@@ -225,7 +225,7 @@ static void sht15_connection_reset(struct sht15_data *data)
}
}
-/**
+/*
* sht15_send_bit() - send an individual bit to the device
* @data: device state data
* @val: value of bit to be sent
@@ -240,7 +240,7 @@ static inline void sht15_send_bit(struct sht15_data *data, int val)
ndelay(SHT15_TSCKL); /* clock low time */
}
-/**
+/*
* sht15_transmission_start() - specific sequence for new transmission
* @data: device state data
*
@@ -269,7 +269,7 @@ static void sht15_transmission_start(struct sht15_data *data)
ndelay(SHT15_TSCKL);
}
-/**
+/*
* sht15_send_byte() - send a single byte to the device
* @data: device state
* @byte: value to be sent
@@ -284,7 +284,7 @@ static void sht15_send_byte(struct sht15_data *data, u8 byte)
}
}
-/**
+/*
* sht15_wait_for_response() - checks for ack from device
* @data: device state
*/
@@ -304,7 +304,7 @@ static int sht15_wait_for_response(struct sht15_data *data)
return 0;
}
-/**
+/*
* sht15_send_cmd() - Sends a command to the device.
* @data: device state
* @cmd: command byte to be sent
@@ -322,7 +322,7 @@ static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
return ret;
}
-/**
+/*
* sht15_soft_reset() - send a soft reset command
* @data: sht15 specific data.
*
@@ -342,7 +342,7 @@ static int sht15_soft_reset(struct sht15_data *data)
return ret;
}
-/**
+/*
* sht15_ack() - send a ack
* @data: sht15 specific data.
*
@@ -362,7 +362,7 @@ static void sht15_ack(struct sht15_data *data)
gpio_direction_input(data->pdata->gpio_data);
}
-/**
+/*
* sht15_end_transmission() - notify device of end of transmission
* @data: device state.
*
@@ -378,7 +378,7 @@ static void sht15_end_transmission(struct sht15_data *data)
ndelay(SHT15_TSCKL);
}
-/**
+/*
* sht15_read_byte() - Read a byte back from the device
* @data: device state.
*/
@@ -398,7 +398,7 @@ static u8 sht15_read_byte(struct sht15_data *data)
return byte;
}
-/**
+/*
* sht15_send_status() - write the status register byte
* @data: sht15 specific data.
* @status: the byte to set the status register with.
@@ -423,7 +423,7 @@ static int sht15_send_status(struct sht15_data *data, u8 status)
return 0;
}
-/**
+/*
* sht15_update_status() - get updated status register from device if too old
* @data: device instance specific data.
*
@@ -490,7 +490,7 @@ error_ret:
return ret;
}
-/**
+/*
* sht15_measurement() - get a new value from device
* @data: device instance specific data
* @command: command sent to request value
@@ -552,7 +552,7 @@ static int sht15_measurement(struct sht15_data *data,
return 0;
}
-/**
+/*
* sht15_update_measurements() - get updated measures from device if too old
* @data: device state
*/
@@ -581,7 +581,7 @@ error_ret:
return ret;
}
-/**
+/*
* sht15_calc_temp() - convert the raw reading to a temperature
* @data: device state
*
@@ -606,7 +606,7 @@ static inline int sht15_calc_temp(struct sht15_data *data)
return data->val_temp * d2 + d1;
}
-/**
+/*
* sht15_calc_humid() - using last temperature convert raw to humid
* @data: device state
*
@@ -641,7 +641,7 @@ static inline int sht15_calc_humid(struct sht15_data *data)
/ 1000000 + rh_linear;
}
-/**
+/*
* sht15_show_status() - show status information in sysfs
* @dev: device.
* @attr: device attribute.
@@ -664,7 +664,7 @@ static ssize_t sht15_show_status(struct device *dev,
return ret ? ret : sprintf(buf, "%d\n", !!(data->val_status & bit));
}
-/**
+/*
* sht15_store_heater() - change heater state via sysfs
* @dev: device.
* @attr: device attribute.
@@ -699,7 +699,7 @@ static ssize_t sht15_store_heater(struct device *dev,
return ret ? ret : count;
}
-/**
+/*
* sht15_show_temp() - show temperature measurement value in sysfs
* @dev: device.
* @attr: device attribute.
@@ -722,7 +722,7 @@ static ssize_t sht15_show_temp(struct device *dev,
sht15_calc_temp(data));
}
-/**
+/*
* sht15_show_humidity() - show humidity measurement value in sysfs
* @dev: device.
* @attr: device attribute.
@@ -859,7 +859,7 @@ static void sht15_update_voltage(struct work_struct *work_s)
data->supply_uV = regulator_get_voltage(data->reg);
}
-/**
+/*
* sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
* @nb: associated notification structure
* @event: voltage regulator state change event code
--
1.7.5.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
