Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/lm75.c | 19 ++++++++++++-------
1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index b3311b1..8510e0c 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -73,10 +73,12 @@ struct lm75_data {
u8 orig_conf;
char valid; /* !=0 if registers are valid */
unsigned long last_updated; /* In jiffies */
- u16 temp[3]; /* Register values,
- 0 = input
- 1 = max
- 2 = hyst */
+ u16 temp[3]; /*
+ * Register values,
+ * 0 = input
+ * 1 = max
+ * 2 = hyst
+ */
};
static int lm75_read_value(struct i2c_client *client, u8 reg);
@@ -163,7 +165,8 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
+ /*
+ * Set to LM75 resolution (9 bits, 1/2 degree C) and range.
* Then tweak to be more precise when appropriate.
*/
set_mask = 0;
@@ -285,8 +288,10 @@ static int lm75_detect(struct i2c_client *new_client,
/* First check for LM75A */
if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
- /* LM75A returns 0xff on unused registers so
- just to be sure we check for that too. */
+ /*
+ * LM75A returns 0xff on unused registers so
+ * just to be sure we check for that too.
+ */
if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
|| i2c_smbus_read_byte_data(new_client, 5) != 0xff
|| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
--
1.7.5.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
