Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/adm1031.c | 60 +++++++++++++++++++++++++---------------------
1 files changed, 33 insertions(+), 27 deletions(-)
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 97e2cfb..7973267 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -1,25 +1,25 @@
/*
- adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Based on lm75.c and lm85.c
- Supports adm1030 / adm1031
- Copyright (C) 2004 Alexandre d'Alton <alex@xxxxxxxxxxxxxx>
- Reworked by Jean Delvare <khali@xxxxxxxxxxxx>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Based on lm75.c and lm85.c
+ * Supports adm1030 / adm1031
+ * Copyright (C) 2004 Alexandre d'Alton <alex@xxxxxxxxxxxxxx>
+ * Reworked by Jean Delvare <khali@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
#include <linux/module.h>
#include <linux/init.h>
@@ -80,7 +80,8 @@ struct adm1031_data {
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
unsigned int update_interval; /* In milliseconds */
- /* The chan_select_table contains the possible configurations for
+ /*
+ * The chan_select_table contains the possible configurations for
* auto fan control.
*/
const auto_chan_table_t *chan_select_table;
@@ -205,7 +206,8 @@ static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
#define GET_FAN_AUTO_BITFIELD(data, idx) \
(*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx % 2]
-/* The tables below contains the possible values for the auto fan
+/*
+ * The tables below contains the possible values for the auto fan
* control bitfields. the index in the table is the register value.
* MSb is the auto fan control enable bit, so the four first entries
* in the table disables auto fan control when both bitfields are zero.
@@ -226,7 +228,8 @@ static const auto_chan_table_t auto_channel_select_table_adm1030 = {
{ 3 /* 0b11 */ , 0 },
};
-/* That function checks if a bitfield is valid and returns the other bitfield
+/*
+ * That function checks if a bitfield is valid and returns the other bitfield
* nearest match if no exact match where found.
*/
static int
@@ -252,7 +255,8 @@ get_fan_auto_nearest(struct adm1031_data *data,
break;
} else if (val == (*data->chan_select_table)[i][chan] &&
first_match == -1) {
- /* Save the first match in case of an exact match has
+ /*
+ * Save the first match in case of an exact match has
* not been found
*/
first_match = i;
@@ -306,9 +310,11 @@ set_fan_auto_channel(struct device *dev, struct device_attribute *attr,
if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^
(old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
- /* Switch to Auto Fan Mode
+ /*
+ * Switch to Auto Fan Mode
* Save PWM registers
- * Set PWM registers to 33% Both */
+ * Set PWM registers to 33% Both
+ */
data->old_pwm[0] = data->pwm[0];
data->old_pwm[1] = data->pwm[1];
adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
--
1.7.5.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
