On Wed, 2011-12-21 at 06:59 -0500, Amit Daniel Kachhap wrote:
> Export and register information from the hwmon tmu sensor to the samsung
> exynos kernel thermal framework where different cooling devices and thermal
> zone are binded. The exported information is based according to the data
> structure thermal_sensor_conf present in exynos_thermal.h. HWMON sysfs
> functions are currently left although all of them are present in generic
> linux thermal layer.
> Also the platform data structure is modified to pass frequency cooling
> in percentages for each thermal level.
>
Hi Amit,
wouldn't it make more sense to merge the code as necessary from
hwmon/exynos4_tmu.c into the new thermal/exynos_thermal.c, and drop
hwmon/exynos4_tmu.c entirely ?
With that, you should get the hwmon entries for free, and we would not
have to maintain two drivers with overlapping functionality.
Thanks,
Guenter
> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@xxxxxxxxxx>
> ---
> drivers/hwmon/exynos4_tmu.c | 34 ++++++++++++++++++++++++++--
> include/linux/platform_data/exynos4_tmu.h | 7 ++++++
> 2 files changed, 38 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c
> index f2359a0..6912a7f 100644
> --- a/drivers/hwmon/exynos4_tmu.c
> +++ b/drivers/hwmon/exynos4_tmu.c
> @@ -37,6 +37,9 @@
> #include <linux/hwmon-sysfs.h>
>
> #include <linux/platform_data/exynos4_tmu.h>
> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
> +#include <linux/exynos_thermal.h>
> +#endif
>
> #define EXYNOS4_TMU_REG_TRIMINFO 0x0
> #define EXYNOS4_TMU_REG_CONTROL 0x20
> @@ -248,10 +251,13 @@ static void exynos4_tmu_work(struct work_struct *work)
>
> kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
>
> - enable_irq(data->irq);
>
> clk_disable(data->clk);
> mutex_unlock(&data->lock);
> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
> + exynos4_report_trigger();
> +#endif
> + enable_irq(data->irq);
> }
>
> static irqreturn_t exynos4_tmu_irq(int irq, void *id)
> @@ -345,6 +351,14 @@ static const struct attribute_group exynos4_tmu_attr_group = {
> .attrs = exynos4_tmu_attributes,
> };
>
> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
> +static struct thermal_sensor_conf exynos4_sensor_conf = {
> + .name = "exynos4-therm",
> + .read_temperature = (int (*)(void *))exynos4_tmu_read,
> +};
> +#endif
> +/*CONFIG_SAMSUNG_THERMAL_INTERFACE*/
> +
> static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
> {
> struct exynos4_tmu_data *data;
> @@ -432,9 +446,20 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
> }
>
> exynos4_tmu_control(pdev, true);
> -
> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
> + (&exynos4_sensor_conf)->private_data = data;
> + (&exynos4_sensor_conf)->sensor_data = pdata;
> + ret = exynos4_register_thermal(&exynos4_sensor_conf);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register thermal interface\n");
> + goto err_hwmon_device;
> + }
> +#endif
> return 0;
> -
> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
> +err_hwmon_device:
> + hwmon_device_unregister(data->hwmon_dev);
> +#endif
> err_create_group:
> sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
> err_clk:
> @@ -458,6 +483,9 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
>
> exynos4_tmu_control(pdev, false);
>
> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
> + exynos4_unregister_thermal();
> +#endif
> hwmon_device_unregister(data->hwmon_dev);
> sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
>
> diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h
> index 39e038c..642c508 100644
> --- a/include/linux/platform_data/exynos4_tmu.h
> +++ b/include/linux/platform_data/exynos4_tmu.h
> @@ -21,6 +21,7 @@
>
> #ifndef _LINUX_EXYNOS4_TMU_H
> #define _LINUX_EXYNOS4_TMU_H
> +#include <linux/cpu_cooling.h>
>
> enum calibration_type {
> TYPE_ONE_POINT_TRIMMING,
> @@ -64,6 +65,9 @@ enum calibration_type {
> * in the positive-TC generator block
> * 0 <= reference_voltage <= 31
> * @cal_type: calibration type for temperature
> + * @freq_pctg_table: Table representing frequency reduction percentage.
> + * @freq_tab_count: Count of the above table as frequency reduction may
> + * applicable to only some of the trigger levels.
> *
> * This structure is required for configuration of exynos4_tmu driver.
> */
> @@ -79,5 +83,8 @@ struct exynos4_tmu_platform_data {
> u8 reference_voltage;
>
> enum calibration_type cal_type;
> +
> + struct freq_pctg_table freq_tab[4];
> + unsigned int freq_tab_count;
> };
> #endif /* _LINUX_EXYNOS4_TMU_H */
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
