On 12/08/2011 05:13 PM, Steve Sakoman wrote:
Currently the driver does not explicitly set the TWL4030_USB_SEL_MADC_MCPC bit to enable madc input channels 3 through 6. This results in readings near zero for these channels since the inputs are grounded if this bit is not set.
I've run into this same problem and have fixed it the same way, looks good to me.
Reviewed-by: Kyle Manna <kyle@xxxxxxxxxxxxx> - Kyle _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
