On Thu, Nov 03, 2011 at 05:19:25PM +0200, Lars Noodén wrote: > On 11/03/2011 05:06 PM, Guenter Roeck wrote: > > On Thu, 2011-11-03 at 10:25 -0400, Lars Noodén wrote: > [snip] > >> The one machine reports one fan and the other two fans. I haven't found > >> a way to set the fan speed manually. The output from sensors > >> is > >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/881593/comments/44 > >> and here > >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/881593/comments/47 > > > > Do the fans actually turn, or is the output bogus ? > > The output is bogus, the fans are not turning. On #47 there above, I > think the temperatures might be inaccurate, too. Since they'll go up > and down as much as 8 degrees in a few seconds. > > > You should be able to set the fan speed by writing into the fanX_input > > and/or fanX_output sysfs attributes. You find those > > in /sys/class/hwmon/hwmon0/device (assuming there is only one hwmon > > device). > > I can set the fan speed manually. e.g.: > > echo 3500 > /sys/class/hwmon/hwmon0/device/fan1_output > > That helps some. I am confused. >From what I gather, the fans work, and it should be possible to run the macfanctld daemon (not fancontrol) to tune the fans. If there really is a problem with the applesmc, following http://ubuntuforums.org/showthread.php?t=924096 is a good idea. However, the root problem is most likely the GPU consuming too much power. Depending on the exact laptop model, there may or may not be a viable workaround. If you model is very new, there is most likely and active thread about it on the ubuntu forums. After checking around on the forums, if you find that this is still a fan or temperature sensor problem, and not a GPU problem, then please restate the problem as exactly as you can. Thanks. Henrik _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
