Hi all, sensors and fan controlling is not working properly on a Tyan S6631 motherboard, which their support don't help. The fans are always making a very *loud* noise. The system has 5 fans plus fan(s) on the power supply. Bellow i am attaching info on the system and a photo of the sensors chip. If anyone have any tip on how to proceed to make sensors work (and reduce the fan noise) will be very appreciated. Please CC me as i'm not subscribed. Info on system: ========== Image of w83627dhg on motherboard: http://imgur.com/KMU1G Motherboard: Tyan S6631 Lm_sensors and kernel version: lm-sensors 3.3.1-1 (debian), kernel:3.1.0-rc10 (git upstream) Output of sensors: w83793-i2c-0-2f Adapter: SMBus I801 adapter at 0400 VcoreA: +1.13 V (min = +0.00 V, max = +2.05 V) VcoreB: +0.21 V (min = +0.00 V, max = +2.05 V) in2: +1.14 V (min = +0.00 V, max = +2.05 V) in3: +1.79 V (min = +0.00 V, max = +4.08 V) in4: +1.47 V (min = +0.00 V, max = +4.08 V) in5: +3.39 V (min = +0.00 V, max = +4.08 V) in6: +0.98 V (min = +0.00 V, max = +2.04 V) +5V: +5.21 V (min = +4.52 V, max = +5.50 V) 5VSB: +5.00 V (min = +4.52 V, max = +5.50 V) Vbat: +0.00 V (min = +2.70 V, max = +3.30 V) fan1: 8490 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 9060 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 9000 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) fan7: 8940 RPM (min = 0 RPM) fan8: 0 RPM (min = 0 RPM) fan9: 8940 RPM (min = 0 RPM) fan10: 0 RPM (min = 0 RPM) fan11: 0 RPM (min = 0 RPM) fan12: 0 RPM (min = 0 RPM) temp1: +43.0°C (high = +100.0°C, hyst = +95.0°C) sensor = Intel PECI temp2: -128.0°C (high = +100.0°C, hyst = +95.0°C) sensor = thermal diode temp5: +27.0°C (high = +100.0°C, hyst = +95.0°C) sensor = thermistor temp6: +25.0°C (high = +100.0°C, hyst = +95.0°C) sensor = thermistor intrusion0: ALARM beep_enable: disabled w83627dhg-isa-0a10 Adapter: ISA adapter Vcore: +0.00 V (min = +0.00 V, max = +1.74 V) in1: +0.00 V (min = +0.00 V, max = +0.26 V) AVCC: +3.33 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.33 V (min = +2.98 V, max = +3.63 V) in4: +0.00 V (min = +0.26 V, max = +1.02 V) ALARM in5: +0.00 V (min = +1.54 V, max = +0.00 V) ALARM in6: +0.00 V (min = +0.00 V, max = +1.02 V) 3VSB: +3.33 V (min = +2.98 V, max = +3.63 V) Vbat: +3.22 V (min = +2.70 V, max = +3.30 V) fan1: 0 RPM (min = 10546 RPM, div = 128) ALARM fan2: 0 RPM (min = 10546 RPM, div = 128) ALARM fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +127.0°C (high = +20.0°C, hyst = +20.0°C) ALARM sensor = thermist or temp2: +40.5°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermist or cpu0_vid: +0.000 V Output of dmesg: $ dmesg|grep 83627 [ 8.345417] w83627ehf: Forcibly enabling Super-I/O. Sensor is probably unusable. [ 8.345427] w83627ehf: Found W83627DHG chip at 0xa10 Output of lspci -nn: $ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 5100 Chipset Memory Controller Hub [8086:65c0] (rev 90) 00:02.0 PCI bridge [0604]: Intel Corporation 5100 Chipset PCI Express x4 Port 2 [8086:65e2] (rev 90) 00:03.0 PCI bridge [0604]: Intel Corporation 5100 Chipset PCI Express x4 Port 3 [8086:65e3] (rev 90) 00:04.0 PCI bridge [0604]: Intel Corporation 5100 Chipset PCI Express x8 Port 4-5 [8086:65f8] (rev 90) 00:05.0 PCI bridge [0604]: Intel Corporation 5100 Chipset PCI Express x4 Port 5 [8086:65e5] (rev 90) 00:06.0 PCI bridge [0604]: Intel Corporation 5100 Chipset PCI Express x8 Port 6-7 [8086:65f9] (rev 90) 00:07.0 PCI bridge [0604]: Intel Corporation 5100 Chipset PCI Express x4 Port 7 [8086:65e7] (rev 90) 00:08.0 System peripheral [0880]: Intel Corporation 5100 Chipset DMA Engine [8086:65ff] (rev 90) 00:10.0 Host bridge [0600]: Intel Corporation 5100 Chipset FSB Registers [8086:65f0] (rev 90) 00:10.1 Host bridge [0600]: Intel Corporation 5100 Chipset FSB Registers [8086:65f0] (rev 90) 00:10.2 Host bridge [0600]: Intel Corporation 5100 Chipset FSB Registers [8086:65f0] (rev 90) 00:11.0 Host bridge [0600]: Intel Corporation 5100 Chipset Reserved Registers [8086:65f1] (rev 90) 00:13.0 Host bridge [0600]: Intel Corporation 5100 Chipset Reserved Registers [8086:65f3] (rev 90) 00:15.0 Host bridge [0600]: Intel Corporation 5100 Chipset DDR Channel 0 Registers [8086:65f5] (rev 90) 00:16.0 Host bridge [0600]: Intel Corporation 5100 Chipset DDR Channel 1 Registers [8086:65f6] (rev 90) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) 02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] 03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] 06:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV710 [Radeon HD 4350] [1002:954f] 06:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38] 09:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) 09:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) 0a:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) 0a:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) i2cdetect -l output: none -- Melhores cumprimentos/Best Regards, Miguel Figueiredo http://www.DebianPT.org _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
