Currently dropped power down mode support.
V2: Fixes:
- messed up use of cache aligned store fixed.
- correct output format to be milli degrees.
- add documentation file.
Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx>
---
Untested, but trivial port.
Documentation/hwmon/ad7314 | 25 ++++++
drivers/hwmon/Kconfig | 10 +++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ad7314.c | 176 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 212 insertions(+), 0 deletions(-)
diff --git a/Documentation/hwmon/ad7314 b/Documentation/hwmon/ad7314
new file mode 100644
index 0000000..1b026a0
--- /dev/null
+++ b/Documentation/hwmon/ad7314
@@ -0,0 +1,25 @@
+Kernel driver ad7314
+====================
+
+Supported chips:
+ * Analog Devices AD7314
+ Prefx: 'ad7314'
+ Datasheet: Publicaly available at Analog Devices website.
+ * Analog Devices ADT7301
+ Prefx: 'adt7301'
+ Datasheet: Publicaly available at Analog Devices website.
+ * Analog Devices ADT7302
+ Prefx: 'adt7302'
+ Datasheet: Publicaly available at Analog Devices website.
+
+Description
+-----------
+
+Driver supports the above parts. The ad7314 has a 10 bit
+sensor with 1lsb = 0.25 degrees centigrade. The adt7301 and
+adt7302 have 14 bit sensors with 1lsb = 0.03125 degrees centigrade.
+
+Notes
+-----
+
+Currently power down mode is not supported.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0b62c3c..e5d4daa 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -68,6 +68,16 @@ config SENSORS_ABITUGURU3
This driver can also be built as a module. If so, the module
will be called abituguru3.
+config SENSORS_AD7314
+ tristate "Analog Devices AD7314 and compatibles"
+ depends on SPI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7314, ADT7301 and ADT7302 temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7314.
+
config SENSORS_AD7414
tristate "Analog Devices AD7414"
depends on I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3c9ccef..228a4b7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o
obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
+obj-$(CONFIG_SENSORS_AD7314) += ad7314.o
obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
new file mode 100644
index 0000000..a1fea9b
--- /dev/null
+++ b/drivers/hwmon/ad7314.c
@@ -0,0 +1,176 @@
+/*
+ * AD7314 digital temperature sensor driver for AD7314, ADT7301 and ADT7302
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Conversion to hwmon from IIO done by Jonathan Cameron <jic23@xxxxxxxxx>
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * AD7314 power mode
+ */
+#define AD7314_PD 0x2000
+
+/*
+ * AD7314 temperature masks
+ */
+#define AD7314_TEMP_SIGN 0x200
+#define AD7314_TEMP_MASK 0x7FE0
+#define AD7314_TEMP_OFFSET 5
+
+/*
+ * ADT7301 and ADT7302 temperature masks
+ */
+#define ADT7301_TEMP_SIGN 0x2000
+#define ADT7301_TEMP_MASK 0x3FFF
+
+enum ad7314_variant {
+ adt7301,
+ adt7302,
+ ad7314,
+};
+
+struct ad7314_data {
+ struct spi_device *spi_dev;
+ struct device *hwmon_dev;
+ u16 rx ____cacheline_aligned;
+};
+
+static int ad7314_spi_read(struct ad7314_data *chip, s16 *data)
+{
+ int ret;
+
+ ret = spi_read(chip->spi_dev, (u8 *)&chip->rx, sizeof(chip->rx));
+ if (ret < 0) {
+ dev_err(&chip->spi_dev->dev, "SPI read error\n");
+ return ret;
+ }
+
+ *data = be16_to_cpu(chip->rx);
+
+ return ret;
+}
+
+static ssize_t ad7314_show_temperature(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ad7314_data *chip = dev_get_drvdata(dev);
+ s16 data;
+ int ret;
+
+ ret = ad7314_spi_read(chip, &data);
+ if (ret < 0)
+ return ret;
+ switch (spi_get_device_id(chip->spi_dev)->driver_data) {
+ case ad7314:
+ data = (data & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET;
+ data = (data << 6) >> 6;
+
+ return sprintf(buf, "%d\n", 250 * data);
+ case adt7301:
+ case adt7302:
+ /*
+ * Documented as a 13 bit twos complement register
+ * with a sign bit - which is a 14 bit 2's complement
+ * register. 1lsb - 31.25 milli degrees centigrade
+ */
+ data &= ADT7301_TEMP_MASK;
+ data = (data << 2) >> 2;
+
+ return sprintf(buf, "%d\n", (3125 * (int)data)/100);
+ default:
+ return -EINVAL;
+ }
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ ad7314_show_temperature, NULL, 0);
+
+static struct attribute *ad7314_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ad7314_group = {
+ .attrs = ad7314_attributes,
+};
+
+static int __devinit ad7314_probe(struct spi_device *spi_dev)
+{
+ int ret;
+ struct ad7314_data *chip;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ dev_set_drvdata(&spi_dev->dev, chip);
+
+ ret = sysfs_create_group(&spi_dev->dev.kobj, &ad7314_group);
+ if (ret < 0)
+ goto error_free_chip;
+
+ return 0;
+error_free_chip:
+ kfree(chip);
+error_ret:
+ return ret;
+}
+
+static int __devexit ad7314_remove(struct spi_device *spi_dev)
+{
+ struct ad7314_data *chip = dev_get_drvdata(&spi_dev->dev);
+
+ hwmon_device_unregister(chip->hwmon_dev);
+ sysfs_remove_group(&spi_dev->dev.kobj, &ad7314_group);
+ kfree(chip);
+
+ return 0;
+}
+
+static const struct spi_device_id ad7314_id[] = {
+ { "adt7301", adt7301 },
+ { "adt7302", adt7302 },
+ { "ad7314", ad7314 },
+ {}
+};
+
+static struct spi_driver ad7314_driver = {
+ .driver = {
+ .name = "ad7314",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7314_probe,
+ .remove = __devexit_p(ad7314_remove),
+ .id_table = ad7314_id,
+};
+
+static __init int ad7314_init(void)
+{
+ return spi_register_driver(&ad7314_driver);
+}
+module_init(ad7314_init);
+
+static __exit void ad7314_exit(void)
+{
+ spi_unregister_driver(&ad7314_driver);
+}
+module_exit(ad7314_exit);
+
+MODULE_AUTHOR("Sonic Zhang <sonic.zhang@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices AD7314, ADT7301 and ADT7302 digital"
+ " temperature sensor driver");
+MODULE_LICENSE("GPL v2");
--
1.7.3.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
