2011/9/25 Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>: > On Sun, Sep 25, 2011 at 12:27:48PM -0400, Josu Lazkano wrote: > [ ... ] >> >> Thanks for your reply, I have loaded the lm90 module: >> >> $ lsmod | grep lm90 >> lm90 7728 0 >> i2c_core 12795 9 >> i2c_dev,lm90,ds3000,cx23885,v4l2_common,videodev,nvidia,tveeprom,i2c_nforce2 >> >> Sorry, but I have no idea how to compile the driver for my kernel. >> Could you help with some steps? >> > Download all files from http://khali.linux-fr.org/devel/misc/lm90 into some directory, > then run > make > sudo make install > sudo modprobe -r lm90 > sudo modprobe lm90 > > Guenter > Thanks!!! Now I have more data, I make this: $ make CC [M] /home/lazkano/Desktop/lm90_driver/lm90.o Building modules, stage 2. MODPOST 1 modules CC /home/lazkano/Desktop/lm90_driver/lm90.mod.o LD [M] /home/lazkano/Desktop/lm90_driver/lm90.ko # make install test -d /lib/modules/2.6.32-5-686/kernel/drivers/hwmon || mkdir /lib/modules/2.6.32-5-686/kernel/drivers/hwmon cp lm90.ko /lib/modules/2.6.32-5-686/kernel/drivers/hwmon depmod -a -F /boot/System.map-2.6.32-5-686 2.6.32-5-686 # modprobe -r lm90 # modprobe lm90 Then sensor-detect and I got this: # sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (crit = +90.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +34.0°C (crit = +90.0°C) w83l771-i2c-0-4c Adapter: SMBus nForce2 adapter at 4d00 temp1: +54.0°C (low = -40.0°C, high = +70.0°C) (crit = +85.0°C, hyst = +75.0°C) temp2: +65.4°C (low = -40.0°C, high = +70.0°C) (crit = +110.0°C, hyst = +100.0°C) Are this temps for my GPU? I want to get USB voltage of my board, is this possible? Thanks for your great help. Best regards. -- Josu Lazkano _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
