I am under the impression that error paths in functions
aem_init_aem1_inst() and aem_init_aem2_inst() are incorrect. In
several cases, the function returns 0 on error, which I suspect is
not intended. Fix this by properly tracking error codes.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: Darrick J. Wong <djwong@xxxxxxxxxx>
Cc: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
---
Darrick, can you please confirm that none of the missing error codes
was on purpose, and that my patch doesn't break anything? Thanks.
drivers/hwmon/ibmaem.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- linux-3.1-rc2.orig/drivers/hwmon/ibmaem.c 2011-08-18 18:57:17.000000000 +0200
+++ linux-3.1-rc2/drivers/hwmon/ibmaem.c 2011-08-18 19:16:12.000000000 +0200
@@ -602,24 +602,26 @@ static int aem_init_aem1_inst(struct aem
platform_set_drvdata(data->pdev, data);
/* Set up IPMI interface */
- if (aem_init_ipmi_data(&data->ipmi, probe->interface,
- probe->bmc_device))
+ res = aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device);
+ if (res)
goto ipmi_err;
/* Register with hwmon */
data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
-
if (IS_ERR(data->hwmon_dev)) {
dev_err(&data->pdev->dev, "Unable to register hwmon "
"device for IPMI interface %d\n",
probe->interface);
+ res = PTR_ERR(data->hwmon_dev);
goto hwmon_reg_err;
}
data->update = update_aem1_sensors;
/* Find sensors */
- if (aem1_find_sensors(data))
+ res = aem1_find_sensors(data);
+ if (res)
goto sensor_err;
/* Add to our list of AEM devices */
@@ -735,24 +737,26 @@ static int aem_init_aem2_inst(struct aem
platform_set_drvdata(data->pdev, data);
/* Set up IPMI interface */
- if (aem_init_ipmi_data(&data->ipmi, probe->interface,
- probe->bmc_device))
+ res = aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device);
+ if (res)
goto ipmi_err;
/* Register with hwmon */
data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
-
if (IS_ERR(data->hwmon_dev)) {
dev_err(&data->pdev->dev, "Unable to register hwmon "
"device for IPMI interface %d\n",
probe->interface);
+ res = PTR_ERR(data->hwmon_dev);
goto hwmon_reg_err;
}
data->update = update_aem2_sensors;
/* Find sensors */
- if (aem2_find_sensors(data))
+ res = aem2_find_sensors(data);
+ if (res)
goto sensor_err;
/* Add to our list of AEM devices */
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
