-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi list,
I have a small system built around an Alix 2D2 motherboard. lm_sensors
used to work fine using the scx200_axb and lm90 modules, I was able to
get this:
[admin@localhost ~]$ sensors
lm86-i2c-0-4c
Adapter: CS5536 ACB0
temp1: +40.0°C (low = +0.0°C, high = +70.0°C)
(crit = +85.0°C, hyst = +75.0°C)
temp2: +45.9°C (low = +0.0°C, high = +70.0°C)
(crit = +85.0°C, hyst = +75.0°C)
But for some time now, it no longer works. I load the same modules, but
it seems like the lm90 is no longer seen, though the module loads fine.
All I get in the logs is:
scx200_acb: NatSemi SCx200 ACCESS.bus Driver
i2c /dev entries driver
I'm using lm_sensors-3.3.0, and kernel-3.0.1 (config attached).
sensors-detect output:
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `scx200_acb' for device 0000:00:0f.0: CS5536 [Geode
companion] ISA
Module scx200_acb loaded successfully.
Module i2c-dev loaded successfully.
Sorry, no sensors were detected.
What am I missing ?
Thanks,
- --
Jean-Denis Girard
SysNux Systèmes Linux en Polynésie française
http://www.sysnux.pf/ Tél: +689 50 10 40 / GSM: +689 79 75 27
-----BEGIN PGP SIGNATURE-----
iEYEARECAAYFAk5Km+4ACgkQuu7Rv+oOo/gZQQCfaYHgEWkSZcxsPkBIcs1C4wrs
+8wAnRJ3ZBJ3YwTPHG4DMEpjIE8kD4f7
=G4E8
-----END PGP SIGNATURE-----
Attachment:
config-3.0.1-sysnux-ix100-test.bz2
Description: BZip2 compressed data
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
