Hi, Yes, the sensors daemon is loading it: [jmss@steklov ~]$ lsmod |grep it87 it87 19266 0 hwmon_vid 2056 1 it87 When I restart the sensors daemon it prints this to the system log: Aug 13 11:45:04 localhost kernel: [32388.581173] it87: Found IT8705F chip at 0x290, revision 2 On Fri, Aug 12, 2011 at 7:32 PM, Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> wrote: > On Fri, Aug 12, 2011 at 07:06:07AM -0400, João M. S. Silva wrote: >> Hi, >> >> When I type "sensors", I get: >> >> acpitz-virtual-0 >> Adapter: Virtual device >> temp1: +51.0°C (crit = +105.0°C) >> >> and nothing else. I can't seem to get the chipset info. >> >> "sensors-detect" detected: >> >> (...) >> Now follows a summary of the probes I have just done. >> Just press ENTER to continue: >> >> Driver `it87': >> * ISA bus, address 0x290 >> Chip `ITE IT8705F Super IO Sensors' (confidence: 9) >> >> Do you want to generate /etc/conf.d/lm_sensors? (YES/no): >> You should now start the lm_sensors service to load the required >> kernel modules. >> >> Unloading i2c-dev... OK >> Unloading cpuid... OK >> (...) >> >> Why doesn't "sensors" print it87-related info? >> >> I don't know if it is related, but sometimes the temperature gets very >> high (I notice it with my fingers) and I have to reboot; then the fan >> runs at full speed for about 2 min to cool the CPU. >> >> Any help? >> > Did you add it87 to the list of modules to load, and is it loaded ? > You should see that with the "lsmod" command. > > Guenter > -- João M. S. Silva _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
