LM95231 is fully compatible to LM95241; only necessary change is to add
chip detection.
Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
---
drivers/hwmon/lm95241.c | 26 +++++++++++++++++++-------
1 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index d1bbdf8..94a8f3c 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -75,7 +75,8 @@ static const unsigned short normal_i2c[] = {
#define TT_ON 1
#define TT_MASK 7
#define MANUFACTURER_ID 0x01
-#define DEFAULT_REVISION 0xA4
+#define LM95231_CHIP_ID 0xA1
+#define LM95241_CHIP_ID 0xA4
static const u8 lm95241_reg_address[] = {
LM95241_REG_R_LOCAL_TEMPH,
@@ -331,17 +332,27 @@ static int lm95241_detect(struct i2c_client *new_client,
{
struct i2c_adapter *adapter = new_client->adapter;
const char *name;
+ int mfg_id;
+ int chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
- != MANUFACTURER_ID
- || i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- != DEFAULT_REVISION)
+ mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID);
+ if (mfg_id != MANUFACTURER_ID)
return -ENODEV;
- name = DEVNAME;
+ chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID);
+ switch (chip_id) {
+ case LM95231_CHIP_ID:
+ name = "lm95231";
+ break;
+ case LM95241_CHIP_ID:
+ name = "lm95241";
+ break;
+ default:
+ return -ENODEV;
+ }
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
@@ -418,7 +429,8 @@ static int lm95241_remove(struct i2c_client *client)
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95241_id[] = {
- { DEVNAME, 0 },
+ { "lm95231", 0 },
+ { "lm95241", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95241_id);
--
1.7.3.1
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
