Hi, With the force_id=0x8721 parameter, the driver should load fine. However we don't know how compatible the IT8772E chip is with the IT8721F, so it may not work perfectly. That's why we were calling for testers. It works however there is still some troubles : it8721-isa-0a30 Adapter: ISA adapter in0: +1.01 V (min = +0.82 V, max = +0.58 V) ALARM in1: +1.60 V (min = +0.94 V, max = +1.56 V) ALARM in2: +1.07 V (min = +2.56 V, max = +1.20 V) ALARM in3: +1.04 V (min = +2.40 V, max = +2.44 V) ALARM in4: +0.49 V (min = +1.93 V, max = +1.73 V) ALARM in5: +2.22 V (min = +0.12 V, max = +2.59 V) in6: +2.22 V (min = +1.02 V, max = +1.93 V) ALARM 3VSB: +3.31 V (min = +5.57 V, max = +0.05 V) ALARM Vbat: +3.26 V fan1: 0 RPM (min = 57 RPM) ALARM fan2: 1397 RPM (min = 19 RPM) fan3: 0 RPM (min = 79 RPM) ALARM temp1: +42.0°C (low = -35.0°C, high = +17.0°C) ALARM sensor = thermistor temp2: +54.0°C (low = +64.0°C, high = +76.0°C) ALARM sensor = thermal diode temp3: -128.0°C (low = +57.0°C, high = +54.0°C) sensor = disabled So ideally you'd write down every monitored value in your BIOS, and compare with the output of "sensors" under Linux, and we can try to write a configuration file for your board, and we see if any problem shows up. How can I write down every monitored value in my bios ? Thanks (et Merci pour Jean) |
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
