On Mon, Jun 27, 2011 at 06:20:51AM -0400, Alexander Stein wrote: > Hello, > > I have a patch (for v2.6.39) which adds support for Intel Atom E6XX > (TunnelCreek) to coretemp. It's merely only adding x86_model 0x26. > But there are models (e.g. E660 and E660T) with different TjMax, namely 90 > degrees C and 110 degrees C. But these different model can't be detected by > reading from hardware. > IMO there should be some support to adjust the temperature from userspace. > Reading Documentation/hwmon/sysfs-interface only temp1_offset seems to be > useable. But I think it is somewhat misleading (especially on multicores), > because there must only be one offset. > What do you think about this? > You can adjust the reported temperature with an entry in sensors3.conf. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors