[PATCH] sensors-detect: Add support for NXP/Philips SA56004

[Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>]

Index: prog/detect/sensors-detect
===================================================================
--- prog/detect/sensors-detect	(revision 5980)
+++ prog/detect/sensors-detect	(working copy)
@@ -1055,6 +1055,11 @@
 		i2c_addrs => [0x4c..0x4d],
 		i2c_detect => sub { lm90_detect(@_, 13); },
 	}, {
+		name => "NXP/Philips SA56004",
+		driver => "lm90",
+		i2c_addrs => [0x48..0x4f],
+		i2c_detect => sub { lm90_detect(@_, 14); },
+	}, {
 		name => "Analog Devices ADT7481",
 		driver => "to-be-written",
 		i2c_addrs => [0x4c, 0x4b],
@@ -4352,7 +4357,7 @@
 #		  6 = MAX6646/MAX6647/MAX6648/MAX6649/MAX6692,
 #		  8 = W83L771W/G, 9 = TMP401, 10 = TMP411,
 #		  11 = W83L771AWG/ASG, 12 = MAX6690,
-#		  13 = ADT7461A/NCT1008
+#		  13 = ADT7461A/NCT1008, 14 = SA56004
 # Registers used:
 #   0x03: Configuration
 #   0x04: Conversion rate
@@ -4457,6 +4462,12 @@
 		return if $mid != 0x41;		# Analog Devices
 		return 8 if $cid == 0x57;	# ADT7461A, NCT1008
 	}
+	if ($chip == 14) {
+		return if ($conf & 0x2a) != 0;
+		return if $rate > 0x09;
+		return if $mid != 0xa1;		# NXP Semiconductor/Philips
+		return 8 if $cid == 0x00;	# SA56004
+	}
 	return;
 }
 
Index: CHANGES
===================================================================
--- CHANGES	(revision 5980)
+++ CHANGES	(working copy)
@@ -15,6 +15,7 @@
                   Add detection of SMSC EMC2300
                   Add detection of MAX6642
                   Add detection of ITE IT8772E
+                  Add detection of SE56004
 
 3.3.0 (2011-03-28)
   Makefile: Check for bison and flex

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors