On Tue, Jun 21, 2011 at 01:47:07AM -0400, Shubhrajyoti Datta wrote: > > > On Mon, Jun 20, 2011 at 1:18 PM, Donggeun Kim <dg77.kim@xxxxxxxxxxx> wrote: > > This patch adds support for NTC Thermistor series. In this release, the > following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473, > and NCP15WL333. This driver is based on the datasheet of MURATA. > > The driver in the patch does conversion from the raw ADC value > (either voltage or resistence) to temperature. In order to use > voltage values as input, the circuit schematics should be provided > with the platform data. A compensation table for each type of thermistor > is provided for the conversion. > > Signed-off-by: Donggeun Kim <dg77.kim@xxxxxxxxxxx> > Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> > Signed-off-by: KyungMin Park <kyungmin.park@xxxxxxxxxxx> > > > Looks good feel free to add > my reviewed by : Shubhrajyoti D <shubhrajyoti@xxxxxx > > Done, thanks. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
