sensor details for W83627HG-AW

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I am trying to run lm-sensor on my machine. It is having W83627HG-AW chip.
I am using linux-2.6.27.45.
Module loaded are hwmon, hwmon-vid, w83627hf. I am getting error in dmesg as

w83627hf: Found W83627HF chip at 0x290
hwmon-vid: Unknown VRM version of your x86 CPU

output of cpuinfo:
# cat /proc/cpuinfo
processor       : 0
vendor_id       : CentaurHauls
cpu family      : 6
model           : 13
model name      : VIA Eden Processor  500MHz
stepping        : 0
cpu MHz         : 499.938
cache size      : 128 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge cmov pat clflush acpi mmx fxsr sse sse2 tm nx pni est tm2 xtpr rng rng_en ace ace_en ace2 ace2_en phe phe_en pmm pmm_en
bogomips        : 999.87
clflush size    : 64
power management:

Senors output :
w83627hf-isa-0290
Adapter: ISA adapter
in0:          +0.69 V  (min =  +0.00 V, max =  +4.08 V)
in1:          +1.06 V  (min =  +0.00 V, max =  +4.08 V)
in2:          +3.30 V  (min =  +2.82 V, max =  +3.79 V)
in3:          +2.99 V  (min =  +3.57 V, max =  +1.73 V)  ALARM
in4:          +3.26 V  (min =  +1.98 V, max =  +4.05 V)
in5:          +3.31 V  (min =  +3.57 V, max =  +3.17 V)  ALARM
in6:          +3.33 V  (min =  +1.78 V, max =  +0.53 V)  ALARM
in7:          +3.28 V  (min =  +0.26 V, max =  +2.29 V)  ALARM
in8:          +3.50 V  (min =  +2.99 V, max =  +0.64 V)  ALARM
fan1:           0 RPM  (min = 14062 RPM, div = 2)  ALARM
fan2:           0 RPM  (min =   -1 RPM, div = 2)  ALARM
fan3:           0 RPM  (min =   -1 RPM, div = 2)  ALARM
temp1:        +55.0 C  (high =  +9.0 C, hyst = +32.0 C)  ALARM  sensor = thermistor
temp2:        +39.5 C  (high = +120.0 C, hyst = +115.0 C)  sensor = diode
temp3:        -48.0 C  (high = +120.0 C, hyst = +115.0 C)  sensor = thermistor
cpu0_vid:    +0.000 V
beep_enable: enabled

Values different then What i get in BIOS.
Bios system health:
System Temp : 52C / 125 F
CPU Temp : 43C/ 109F
FAN1 : 0
FAN2 : 0
FAN3 : 0
Vcore : 0.68V
Vccp : 1.05V
+3.3V : 3.29V
+5V : 5.05V
+12V : 12.40V
VBAT : 3.50V
5VSB : 4.99V


Regards,
Krunal
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux