Jean Delvare ÐÐÑÐÑ:
On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
2. Statement "ignore temp5" does not take effect. I see line about "PECI
Agent 1"
Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
the right number.
Thank you, Jean!
I've tried temp5..7 and no results. But with "sensors -u" it figured out
to be temp8 :)
I think the configuration can now be added to wiki, I've attached the file.
According to the message
http://lists.lm-sensors.org/pipermail/lm-sensors/2011-March/031775.html
this confguration can be used for DH67CL board, possibly with very small
changes.
--
Arseny Klimovsky
# Created for board DH67BL using information from Inte Desktop Utilities and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
chip "nct6775-isa-0290"
# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU
label fan2 "CPU fan"
set fan2_min 250 # From IDU
label fan3 "Front fan"
set fan3_min 250 # From IDU
# There is no fan4 on the board
ignore fan4
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.6 # From IDU
set in0_max 1.6 # From IDU
# This should be "12 Volts", but computations are strange
label in1 "+12V"
compute in1 11*@, @/11
set in1_min 11.1 # From IDU
set in1_max 12.9 # From IDU
# AVCC(?) - Not shown in BIOS or IDU
label in2 "AVCC"
set in2_min 3.0 # same as +3.3V
set in2_max 3.6 # same as +3.3V
# +3.3 Volts
label in3 "+3.3V"
set in3_min 3.0 # from IDU
set in3_max 3.6 # from IDU
# +5 Volts
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 4.6 # from IDU
set in4_max 5.4 # from IDU
# Memory Vcc ("SDRAM Vcc" in IDU)
label in5 "MemV"
compute in5 1.5*@, @/1.5
set in5_min 0.4 # from IDU
set in5_max 2.0 # from IDU
# PCH Vcc
label in6 "PCHV"
set in6_min 0.6 # from IDU
set in6_max 1.6 # from IDU
# +3.3 Volt Standby
label in7 "3VSB"
set in7_min 3.0 # from IDU
set in7_max 3.6 # from IDU
# VBAT(?) - Not shown in BIOS or IDU
label in8 "Vbat"
# It shows +2.050 V, seems to be not used
ignore cpu0_vid
# Temperatures
# Labeled as "SYSTIN"
# Guess!
label temp1 "VR temp"
set temp1_max 90 # From IDU
set temp1_max_hyst 75 # From IDU
# Labeled as "CPUTIN"
label temp2 "CPU temp"
set temp2_max 93 # From IDU
set temp2_max_hyst 75 # From IDU
# Labeled as "PECI Agent 0"
# Guess!
label temp3 "Memory DIMM temp"
set temp3_max 90 # From IDU
set temp3_max_hyst 75 # From IDU
# Labeled as "PCH_CHIP_TEMP"
label temp4 "PCH temp"
# Labeled as "PECI Agent 1"
# Not used
ignore temp8
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
