[PATCH 3/3] hwmon: New driver sch5636

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds a new driver for SMSC SCH5636 Super I/O chips.
The chips include an embedded microcontroller for hardware monitoring
solutions, allowing motherboard manufacturers to create their own custom
hwmon solution based upon the SCH5636.

Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636 based
hwmon solution. The sch5636 driver runs a sanity check on loading to ensure
it is dealing with a Fujitsu Theseus and not with another custom SCH5636 based
hwmon solution.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 Documentation/hwmon/sch5636    |   31 +++
 drivers/hwmon/Kconfig          |   15 ++
 drivers/hwmon/Makefile         |    1 +
 drivers/hwmon/sch5636.c        |  539 ++++++++++++++++++++++++++++++++++++++++
 drivers/hwmon/sch56xx-common.c |    4 +
 5 files changed, 590 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/hwmon/sch5636
 create mode 100644 drivers/hwmon/sch5636.c

diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636
new file mode 100644
index 0000000..ac975a6
--- /dev/null
+++ b/Documentation/hwmon/sch5636
@@ -0,0 +1,31 @@
+Kernel driver sch5636
+=====================
+
+Supported chips:
+  * SMSC SCH5636
+    Prefix: 'sch5636'
+    Addresses scanned: none, address read from Super I/O config space
+
+Author: Hans de Goede <hdegoede@xxxxxxxxxx>
+
+
+Description
+-----------
+
+SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+hardware monitoring solutions, allowing motherboard manufacturers to create
+their own custom hwmon solution based upon the SCH5636.
+
+Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636 based
+hwmon solution. The sch5636 driver runs a sanity check on loading to ensure
+it is dealing with a Fujitsu Theseus and not with another custom SCH5636 based
+hwmon solution.
+
+The Fujitsu Theseus can monitor up to 5 voltages, 8 fans and 16
+temperatures. Note that the driver detects how many fan headers /
+temperature sensors are actually implemented on the motherboard, so you will
+likely see fewer temperature and fan inputs.
+
+An application note decribing the Theseus' registers, as well as an
+application note describing the protocol for communicating with the
+microcontroller is available upon request. Please mail me if you want a copy.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e273c0c..68e5cdf 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1055,6 +1055,21 @@ config SENSORS_SCH5627
 	  This driver can also be built as a module.  If so, the module
 	  will be called sch5627.
 
+config SENSORS_SCH5636
+	tristate "SMSC SCH5636"
+	select SENSORS_SCH56XX_COMMON
+	help
+	  SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+	  hardware monitoring solutions, allowing motherboard manufacturers to
+	  create their own custom hwmon solution based upon the SCH5636.
+
+	  Currently this driver only supports the Fujitsu Theseus SCH5636 based
+	  hwmon solution. Say yes here if you want support for the Fujitsu
+	  Theseus' hardware monitoring features.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sch5636.
+
 config SENSORS_ADS1015
 	tristate "Texas Instruments ADS1015"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index ae59bca..d7995a1 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
+obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c
new file mode 100644
index 0000000..244407a
--- /dev/null
+++ b/drivers/hwmon/sch5636.c
@@ -0,0 +1,539 @@
+/***************************************************************************
+ *   Copyright (C) 2011 Hans de Goede <hdegoede@xxxxxxxxxx>                *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include "sch56xx-common.h"
+
+#define DRVNAME "sch5636"
+#define DEVNAME "theseus" /* We only support one model for now */
+
+#define SCH5636_REG_FUJITSU_ID		0x780
+#define SCH5636_REG_FUJITSU_REV		0x783
+
+#define SCH5636_NO_INS			5
+#define SCH5636_NO_TEMPS		16
+#define SCH5636_NO_FANS			8
+
+static const u16 SCH5636_REG_IN_VAL[SCH5636_NO_INS] = {
+	0x22, 0x23, 0x24, 0x25, 0x189 };
+static const u16 SCH5636_REG_IN_FACTORS[SCH5636_NO_INS] = {
+	4400, 1500, 4000, 4400, 16000 };
+static const char * const SCH5636_IN_LABELS[SCH5636_NO_INS] = {
+	"3.3V", "VREF", "VBAT", "3.3AUX", "12V" };
+
+static const u16 SCH5636_REG_TEMP_VAL[SCH5636_NO_TEMPS] = {
+	0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181,
+	0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C };
+#define SCH5636_REG_TEMP_CTRL(i)	(0x790 + (i))
+#define SCH5636_TEMP_WORKING		0x01
+#define SCH5636_TEMP_ALARM		0x02
+#define SCH5636_TEMP_DEACTIVATED	0x80
+
+static const u16 SCH5636_REG_FAN_VAL[SCH5636_NO_FANS] = {
+	0x2C, 0x2E, 0x30, 0x32, 0x62, 0x64, 0x66, 0x68 };
+#define SCH5636_REG_FAN_CTRL(i)		(0x880 + (i))
+/* FAULT in datasheet, but acts as an alarm */
+#define SCH5636_FAN_ALARM		0x04
+#define SCH5636_FAN_NOT_PRESENT		0x08
+#define SCH5636_FAN_DEACTIVATED		0x80
+
+
+struct sch5636_data {
+	unsigned short addr;
+	struct device *hwmon_dev;
+
+	struct mutex update_lock;
+	char valid;			/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	u8 in[SCH5636_NO_INS];
+	u8 temp_val[SCH5636_NO_TEMPS];
+	u8 temp_ctrl[SCH5636_NO_TEMPS];
+	u16 fan_val[SCH5636_NO_FANS];
+	u8 fan_ctrl[SCH5636_NO_FANS];
+};
+
+static struct sch5636_data *sch5636_update_device(struct device *dev)
+{
+	struct sch5636_data *data = dev_get_drvdata(dev);
+	struct sch5636_data *ret = data;
+	int i, val;
+
+	mutex_lock(&data->update_lock);
+
+	/* Cache the values for 1 second */
+	if (data->valid && !time_after(jiffies, data->last_updated + HZ))
+		goto abort;
+
+	for (i = 0; i < SCH5636_NO_INS; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_IN_VAL[i]);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->in[i] = val;
+	}
+
+	for (i = 0; i < SCH5636_NO_TEMPS; i++) {
+		if (data->temp_ctrl[i] & SCH5636_TEMP_DEACTIVATED)
+			continue;
+
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_TEMP_VAL[i]);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_val[i] = val;
+
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_TEMP_CTRL(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_ctrl[i] = val;
+		/* Alarms need to be explicitly write-cleared */
+		if (val & SCH5636_TEMP_ALARM) {
+			sch56xx_write_virtual_reg(data->addr,
+						SCH5636_REG_TEMP_CTRL(i), val);
+		}
+	}
+
+	for (i = 0; i < SCH5636_NO_FANS; i++) {
+		if (data->fan_ctrl[i] & SCH5636_FAN_DEACTIVATED)
+			continue;
+
+		val = sch56xx_read_virtual_reg16(data->addr,
+						 SCH5636_REG_FAN_VAL[i]);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->fan_val[i] = val;
+
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FAN_CTRL(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->fan_ctrl[i] = val;
+		/* Alarms need to be explicitly write-cleared */
+		if (val & SCH5636_FAN_ALARM) {
+			sch56xx_write_virtual_reg(data->addr,
+						SCH5636_REG_FAN_CTRL(i), val);
+		}
+	}
+
+	data->last_updated = jiffies;
+	data->valid = 1;
+abort:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static int reg_to_rpm(u16 reg)
+{
+	if (reg == 0)
+		return -EIO;
+	if (reg == 0xffff)
+		return 0;
+
+	return 5400540 / reg;
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+	char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME);
+}
+
+static ssize_t show_in_value(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = DIV_ROUND_CLOSEST(
+		data->in[attr->index] * SCH5636_REG_IN_FACTORS[attr->index],
+		255);
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_in_label(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			SCH5636_IN_LABELS[attr->index]);
+}
+
+static ssize_t show_temp_value(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->temp_val[attr->index] - 64) * 1000;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_WORKING) ? 0 : 1;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_ALARM) ? 1 : 0;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_value(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = reg_to_rpm(data->fan_val[attr->index]);
+	if (val < 0)
+		return val;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->fan_ctrl[attr->index] & SCH5636_FAN_NOT_PRESENT) ? 1 : 0;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->fan_ctrl[attr->index] & SCH5636_FAN_ALARM) ? 1 : 0;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static struct sensor_device_attribute sch5636_attr[] = {
+	SENSOR_ATTR(name, 0444, show_name, NULL, 0),
+	SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
+	SENSOR_ATTR(in0_label, 0444, show_in_label, NULL, 0),
+	SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
+	SENSOR_ATTR(in1_label, 0444, show_in_label, NULL, 1),
+	SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
+	SENSOR_ATTR(in2_label, 0444, show_in_label, NULL, 2),
+	SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3),
+	SENSOR_ATTR(in3_label, 0444, show_in_label, NULL, 3),
+	SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4),
+	SENSOR_ATTR(in4_label, 0444, show_in_label, NULL, 4),
+};
+
+static struct sensor_device_attribute sch5636_temp_attr[] = {
+	SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+	SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
+	SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
+	SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+	SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
+	SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
+	SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
+	SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
+	SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
+	SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
+	SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
+	SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
+	SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
+	SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
+	SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
+	SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5),
+	SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5),
+	SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5),
+	SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6),
+	SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6),
+	SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6),
+	SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7),
+	SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7),
+	SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7),
+	SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8),
+	SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8),
+	SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8),
+	SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9),
+	SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9),
+	SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9),
+	SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10),
+	SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10),
+	SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10),
+	SENSOR_ATTR(temp12_input, 0444, show_temp_value, NULL, 11),
+	SENSOR_ATTR(temp12_fault, 0444, show_temp_fault, NULL, 11),
+	SENSOR_ATTR(temp12_alarm, 0444, show_temp_alarm, NULL, 11),
+	SENSOR_ATTR(temp13_input, 0444, show_temp_value, NULL, 12),
+	SENSOR_ATTR(temp13_fault, 0444, show_temp_fault, NULL, 12),
+	SENSOR_ATTR(temp13_alarm, 0444, show_temp_alarm, NULL, 12),
+	SENSOR_ATTR(temp14_input, 0444, show_temp_value, NULL, 13),
+	SENSOR_ATTR(temp14_fault, 0444, show_temp_fault, NULL, 13),
+	SENSOR_ATTR(temp14_alarm, 0444, show_temp_alarm, NULL, 13),
+	SENSOR_ATTR(temp15_input, 0444, show_temp_value, NULL, 14),
+	SENSOR_ATTR(temp15_fault, 0444, show_temp_fault, NULL, 14),
+	SENSOR_ATTR(temp15_alarm, 0444, show_temp_alarm, NULL, 14),
+	SENSOR_ATTR(temp16_input, 0444, show_temp_value, NULL, 15),
+	SENSOR_ATTR(temp16_fault, 0444, show_temp_fault, NULL, 15),
+	SENSOR_ATTR(temp16_alarm, 0444, show_temp_alarm, NULL, 15),
+};
+
+static struct sensor_device_attribute sch5636_fan_attr[] = {
+	SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
+	SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
+	SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
+	SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
+	SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
+	SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
+	SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
+	SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
+	SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
+	SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
+	SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
+	SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
+	SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
+	SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
+	SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
+	SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
+	SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
+	SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
+	SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6),
+	SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6),
+	SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6),
+	SENSOR_ATTR(fan8_input, 0444, show_fan_value, NULL, 7),
+	SENSOR_ATTR(fan8_fault, 0444, show_fan_fault, NULL, 7),
+	SENSOR_ATTR(fan8_alarm, 0444, show_fan_alarm, NULL, 7),
+};
+
+static int sch5636_remove(struct platform_device *pdev)
+{
+	struct sch5636_data *data = platform_get_drvdata(pdev);
+	int i;
+
+	if (data->hwmon_dev)
+		hwmon_device_unregister(data->hwmon_dev);
+
+	for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++)
+		device_remove_file(&pdev->dev, &sch5636_attr[i].dev_attr);
+
+	for (i = 0; i < SCH5636_NO_TEMPS * 3; i++)
+		device_remove_file(&pdev->dev,
+				   &sch5636_temp_attr[i].dev_attr);
+
+	for (i = 0; i < SCH5636_NO_FANS * 3; i++)
+		device_remove_file(&pdev->dev,
+				   &sch5636_fan_attr[i].dev_attr);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+
+	return 0;
+}
+
+static int __devinit sch5636_probe(struct platform_device *pdev)
+{
+	struct sch5636_data *data;
+	int i, err, val, revision[2];
+	char id[4];
+
+	data = kzalloc(sizeof(struct sch5636_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+	mutex_init(&data->update_lock);
+	platform_set_drvdata(pdev, data);
+
+	for (i = 0; i < 3; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FUJITSU_ID + i);
+		if (val < 0) {
+			pr_err("Could not read Fujitsu id byte at %#x\n",
+				SCH5636_REG_FUJITSU_ID + i);
+			err = val;
+			goto error;
+		}
+		id[i] = val;
+	}
+	id[i] = '\0';
+
+	if (strcmp(id, "THS")) {
+		pr_err("Unknown Fujitsu id: %02x%02x%02x\n",
+		       id[0], id[1], id[2]);
+		err = -ENODEV;
+		goto error;
+	}
+
+	for (i = 0; i < 2; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FUJITSU_REV + i);
+		if (val < 0) {
+			err = val;
+			goto error;
+		}
+		revision[i] = val;
+	}
+	pr_info("Found %s chip at %#hx, revison: %d.%02d\n", DEVNAME,
+		data->addr, revision[0], revision[1]);
+
+	/* Read all temp + fan ctrl registers to determine which are active */
+	for (i = 0; i < SCH5636_NO_TEMPS; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_TEMP_CTRL(i));
+		if (unlikely(val < 0)) {
+			err = val;
+			goto error;
+		}
+		data->temp_ctrl[i] = val;
+	}
+
+	for (i = 0; i < SCH5636_NO_FANS; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FAN_CTRL(i));
+		if (unlikely(val < 0)) {
+			err = val;
+			goto error;
+		}
+		data->fan_ctrl[i] = val;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++) {
+		err = device_create_file(&pdev->dev,
+					 &sch5636_attr[i].dev_attr);
+		if (err)
+			goto error;
+	}
+
+	for (i = 0; i < (SCH5636_NO_TEMPS * 3); i++) {
+		if (data->temp_ctrl[i/3] & SCH5636_TEMP_DEACTIVATED)
+			continue;
+
+		err = device_create_file(&pdev->dev,
+					&sch5636_temp_attr[i].dev_attr);
+		if (err)
+			goto error;
+	}
+
+	for (i = 0; i < (SCH5636_NO_FANS * 3); i++) {
+		if (data->fan_ctrl[i/3] & SCH5636_FAN_DEACTIVATED)
+			continue;
+
+		err = device_create_file(&pdev->dev,
+					&sch5636_fan_attr[i].dev_attr);
+		if (err)
+			goto error;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		goto error;
+	}
+
+	return 0;
+
+error:
+	sch5636_remove(pdev);
+	return err;
+}
+
+static struct platform_driver sch5636_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRVNAME,
+	},
+	.probe		= sch5636_probe,
+	.remove		= sch5636_remove,
+};
+
+static int __init sch5636_init(void)
+{
+	return platform_driver_register(&sch5636_driver);
+}
+
+static void __exit sch5636_exit(void)
+{
+	platform_driver_unregister(&sch5636_driver);
+}
+
+MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@xxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+
+module_init(sch5636_init);
+module_exit(sch5636_exit);
diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index c610b5f..b6374c3 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
@@ -38,6 +38,7 @@
 #define SIO_REG_ADDR		0x66	/* Logical device address (2 bytes) */
 
 #define SIO_SCH5627_ID		0xC6	/* Chipset ID */
+#define SIO_SCH5636_ID		0xC7	/* Chipset ID */
 
 #define REGION_LENGTH		9
 
@@ -238,6 +239,9 @@ static int __init sch56xx_find(int sioaddr, unsigned short *address,
 	case SIO_SCH5627_ID:
 		*name = "sch5627";
 		break;
+	case SIO_SCH5636_ID:
+		*name = "sch5636";
+		break;
 	default:
 		pr_debug("Unsupported device id: 0x%02x\n",
 			 (unsigned int)devid);
-- 
1.7.5.1


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux