Excerpts from Alan Cox's message of jeu mai 05 09:38:37 -0400 2011: > > I've looked at that, and the board doesn't support DMI. Elements we have > > are the processor (i.e. AMD ElanSC520), the BIOS, maybe the memory and > > PCI bus layouts... > > Well the CPU is a big help that cuts it down a lot. PCI bridge > subvendor/dev can be a good way to identify boards as well if they > manufacturers have actually bothered to set them properly. In a first step, I now check the CPU and the Ethernet chip which are relevant devices of TS-5xxx boards. The only problem comes from the TS-5300 board which has a different Ethernet chip, using the ISA bus. I can't find other relevant device information about this board. So, is the CPU detection (AMD Elan SC520) enough? Or should I add a module parameter to specify the board model and avoid this pre-detection? Thanks, Vivien. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
