Hi Jean -- Here is the output from /usr/bin/sensors with the ecm6w201 driver you just gave us AND from the new i8k driver you mentioned in an earlier e-mail today. Thanks for your work on this!!! Harry McGavran On Sat, 7 May 2011 13:47:21 +0200 Jean Delvare wrote: > Hi Harry, Ric and Jeff, > > On Thu, 05 May 2011 10:40:28 -0600, Harry G McGavran Jr wrote: > > I can hope for an lm-sensors driver... > > I found some time to work on EMC6W201 support and I have something for > you to test. My standalone driver for this chip can be downloaded from: > http://khali.linux-fr.org/devel/misc/emc6w201/ > You only need i2c-compat.h for kernels <= 2.6.32. I build-tested the > driver down to kernel 2.6.27, older kernels may or may not work. > emc6w201.conf is a template configuration file, copy to /etc/sensors.d > and add statements as needed. Generic build instructions are available > at: > http://khali.linux-fr.org/devel/misc/INSTALL > > At this point the driver only supports basic monitoring, in read-only > mode. It seems to work reasonably well on the dumps sent by Harry and > Jeff, but real hardware can behave differently. > > Anyway, let me know how it goes. > > -- > Jean Delvare > http://khali.linux-fr.org/wishlist.html
Attachment:
sensors.out
Description: sensors.out
Harry G. McGavran, Jr. E-mail: w5pny@xxxxxxxxx
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
