[PATCH v8 2/2] Use "request_muxed_region" in it87 hwmon drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



02 - Chages to hwmon it87 driver to use "request_muxed_region"
Serialize access to the hardware by using "request_muxed_region" macro defined
by Alan Cox. Call to this macro will hold off the requestor if the resource is
currently busy. "superio_enter" will return an error if call to 
"request_muxed_region" fails. Rest of the code change is to ripple an error
return from superio_enter to the top level.

Signed-off-by: Nat Gurumoorthy <natg@xxxxxxxxxx>
---

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 316b648..fa3ff02 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -108,13 +108,20 @@ superio_select(int ldn)
 	outb(ldn, VAL);
 }
 
-static inline void
+static inline int
 superio_enter(void)
 {
+	/*
+	 * Try to reserve REG and REG + 1 for exclusive access.
+	 */
+	if (!request_muxed_region(REG, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x87, REG);
 	outb(0x01, REG);
 	outb(0x55, REG);
 	outb(0x55, REG);
+	return 0;
 }
 
 static inline void
@@ -122,6 +129,7 @@ superio_exit(void)
 {
 	outb(0x02, REG);
 	outb(0x02, VAL);
+	release_region(REG, 2);
 }
 
 /* Logical device 4 registers */
@@ -1546,7 +1554,9 @@ static int __init it87_find(unsigned short *address,
 	u16 chip_type;
 	const char *board_vendor, *board_name;
 
-	superio_enter();
+	if (superio_enter())
+		return -EBUSY;
+
 	chip_type = force_id ? force_id : superio_inw(DEVID);
 
 	switch (chip_type) {
-- 
1.7.3.1


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux