hi msi p67a-gd65 rev b3 sandy bridge core i5 ubuntu natty 11.04 64bitsensors version 3.2.0 with libsensors version 3.2.0 Why not detect/show voltages, chipset temp etc? THANKS!!! more info.... ------------------------------------------------------------------------------------------------------------------ # sensors-detect revision 5861 (2010-09-21 17:21:05 +0200) # System: MSI MS-7681 # Board: MSI P67A-GD65 (MS-7681) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found unknown chip with ID 0x1005 (logical device 4 has address 0x290, could be sensors) Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... Success! (confidence 6, driver `lm78') Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Next adapter: NVIDIA i2c adapter (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: NVIDIA i2c adapter (i2c-1) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-3) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-4) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-5) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-6) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-7) Do you want to scan it? (YES/no/selectively): Next adapter: SMBus I801 adapter at f000 (i2c- Do you want to scan it? (YES/no/selectively): Client found at address 0x4b Probing for `National Semiconductor LM75'... No Probing for `Dallas Semiconductor DS75'... No Probing for `National Semiconductor LM77'... No Probing for `Analog Devices ADT7411'... No Probing for `Dallas Semiconductor DS1621/DS1631'... No Probing for `Maxim MAX6650/MAX6651'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `Analog Devices ADT7481'... No Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Driver `lm78': * ISA bus, address 0x290 Chip `National Semiconductor LM78' (confidence: 6) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp lm78 #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK ------------------------------------------------------------------------------------------------------------------ # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc #----lm-sensors---- # Chip drivers coretemp lm78 #----lm-sensors---- ------------------------------------------------------------------------------------------------------------------ coretemp-isa-0000 Adapter: ISA adapter Core 0: +31.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +30.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +32.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +29.0°C (high = +80.0°C, crit = +98.0°C) _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
