I have Intel D525MW V motherboard (http://www.intel.com/Products/Desktop/Motherboards/db-d525mw/D525MW-overview.htm), with last BIOS version installed.
If I look through voltages in bios, then I see something like:
12V : 12.249
5V: 5.094
3.3V: 3.36
5Vstbg: 5.145
Vccp: 1.184
And sensors show wrong voltages:
root@carpc:~# sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +16.0ÂC (crit = +100.0ÂC)
coretemp-isa-0002
Adapter: ISA adapter
Core 1: +8.0ÂC (crit = +100.0ÂC)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.19 V (min = +0.00 V, max = +1.74 V)
in1: +1.59 V (min = +1.72 V, max = +1.02 V) ALARM
AVCC: +3.39 V (min = +2.98 V, max = +3.63 V)
VCC: +3.39 V (min = +2.98 V, max = +3.63 V)
in4: +1.86 V (min = +0.82 V, max = +1.54 V) ALARM
in5: +1.20 V (min = +0.98 V, max = +1.98 V)
in6: +1.59 V (min = +2.03 V, max = +1.54 V) ALARM
3VSB: +3.39 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.26 V (min = +2.70 V, max = +3.30 V)
fan1: 0 RPM (min = 585 RPM, div = 128) ALARM
fan2: 0 RPM (min = 439 RPM, div = 128) ALARM
fan3: 0 RPM (min = 3668 RPM, div = 8) ALARM
fan4: 0 RPM (min = 8653 RPM, div = 4) ALARM
fan5: 0 RPM (min = 6617 RPM, div = 4) ALARM
temp1: +45.0ÂC (high = -33.0ÂC, hyst = -46.0ÂC) ALARM sensor = transistor
temp2: +41.0ÂC (high = +80.0ÂC, hyst = +75.0ÂC) sensor = diode
temp3: +39.5ÂC (high = +80.0ÂC, hyst = +75.0ÂC) sensor = diode
cpu0_vid: +2.050 V
Fans look ok (but I didn't test them).
Here is output of sensors-detect (after saying "yes" to all questions):
Driver `w83627ehf':
* ISA bus, address 0x290
Chip `Winbond W83627DHG-P Super IO Sensors' (confidence: 9)
Driver `coretemp':
* Chip `Intel Atom thermal sensor' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
w83627ehf
#----cut here----
Modules are loaded.
Can you help me with voltages?
Thanks!
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
