From: Wei Ni <wni@xxxxxxxxxx>
This patch add support to configure nct1008 from platform data.
Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
drivers/hwmon/lm90.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/nct1008.h | 38 +++++++++++++++++++++++++++
2 files changed, 104 insertions(+), 0 deletions(-)
create mode 100644 include/linux/nct1008.h
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 1c2ee3f..8b639b0 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -83,6 +83,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/nct1008.h>
/*
* Addresses to scan
@@ -1358,6 +1359,67 @@ static void lm90_init_client(struct i2c_client *client)
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
}
+static void lm90_configure_client(struct i2c_client *client)
+{
+ struct lm90_data *data = i2c_get_clientdata(client);
+ u8 value;
+ u16 value16;
+
+ if (strcmp(client->name, "nct1008")) {
+ struct nct1008_platform_data *pdata = client->dev.platform_data;
+
+ /*
+ * Initial Configuration - device is placed in standby and
+ * ALERT/THERM2 pin is configured as THERM2
+ */
+ lm90_read_reg(client, LM90_REG_R_CONFIG1, &value);
+ if (pdata->ext_range)
+ value |= 0x24;
+ else
+ value |= 0x20;
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, value);
+
+ /* Check Temperature Range Select */
+ if (value & 0x04)
+ data->flags |= LM90_FLAG_ADT7461_EXT;
+
+ /* Temperature conversion rate */
+ value = pdata->conv_rate;
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, value);
+
+ /* External temperature h/w shutdown limit */
+ value = temp_to_u8_adt7461(data, pdata->shutdown_ext_limit);
+ i2c_smbus_write_byte_data(client, LM90_REG_W_REMOTE_CRIT,
+ value);
+
+ /* Local temperature h/w shutdown limit */
+ value = temp_to_u8_adt7461(data, pdata->shutdown_local_limit);
+ i2c_smbus_write_byte_data(client, LM90_REG_W_LOCAL_CRIT, value);
+
+ /* External Temperature Throttling limit */
+ value16 = temp_to_u16_adt7461(data, pdata->throttle_ext_limit);
+ i2c_smbus_write_byte_data(client, LM90_REG_W_REMOTE_HIGHH,
+ value16 >> 8);
+ if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
+ i2c_smbus_write_byte_data(client,
+ LM90_REG_W_REMOTE_HIGHL,
+ value16 & 0xff);
+
+ /* Local Temperature Throttling limit */
+ value = pdata->ext_range ? 191 : 127;
+ i2c_smbus_write_byte_data(client, LM90_REG_W_LOCAL_HIGH, value);
+
+ /* Remote channel offset */
+ value = pdata->offset;
+ i2c_smbus_write_byte_data(client,
+ LM90_REG_W_REMOTE_OFFSH, value);
+
+ /* THERM hysteresis */
+ value = pdata->hysteresis;
+ i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, value);
+ }
+}
+
static int lm90_probe(struct i2c_client *new_client,
const struct i2c_device_id *id)
{
@@ -1393,6 +1455,10 @@ static int lm90_probe(struct i2c_client *new_client,
/* Initialize the LM90 chip */
lm90_init_client(new_client);
+ /* Configure the LM90 chip from platform_data */
+ if (new_client->dev.platform_data)
+ lm90_configure_client(new_client);
+
/* Register sysfs hooks */
err = sysfs_create_group(&new_client->dev.kobj, &lm90_group);
if (err)
diff --git a/include/linux/nct1008.h b/include/linux/nct1008.h
new file mode 100644
index 0000000..3a6ed69
--- /dev/null
+++ b/include/linux/nct1008.h
@@ -0,0 +1,38 @@
+/*
+ * include/linux/nct1008.h
+ *
+ * NCT1008, temperature monitoring device from ON Semiconductors
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _LINUX_NCT1008_H
+#define _LINUX_NCT1008_H
+
+#include <linux/types.h>
+
+struct nct1008_platform_data {
+ bool ext_range;
+ u8 conv_rate;
+ u8 offset;
+ u8 hysteresis;
+ long shutdown_ext_limit;
+ long shutdown_local_limit;
+ long throttle_ext_limit;
+};
+
+#endif /* _LINUX_NCT1008_H */
--
1.7.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
