On Wed, Apr 06, 2011 at 01:38:56PM -0400, Aleksej Serdjukov wrote: > Hi. > > I've got this computer with ASRock E350M1, and have no idea what the > temperatures should actually be. > > This is on Debian 6.0: > Linux 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux > > > IIRC, UEFI Setup was showing about 52°C on the motherboard or chipset, > and 49-52 on the CPU. > > About a week ago I've installed the "w83627ehf" from > <http://roeck-us.net/linux/drivers/w83627ehf/>, and saw that those > temperatures don't go over 53 or 54°C. So I changed the UEFI setting > more and more for slower fan speed (today it was 6). So the speed was > about 4000, while the full speed is about 4900 and 9 is a hundred or a > couple of hundred less. Temperatures didn't go over 54 (or maybe 55) °C. > Idle CPU (at 800MHz thanks to Cool'n'Quiet) went down to 46°C more and more. > > Today, however, while the CPU was not loaded much, the fan appeared to > be full speed again (at least according to the sensors applet). > > But the new sensors-detect was also mentioning "k10temp" (and the old > one in Debian didn't work), so today I installed a new k10temp, and it > showed 60°C for something. > > Now I have set the fan speed to full in UEFI, and here is what "sensors" > shows: > > > nct6775-isa-0290 > Adapter: ISA adapter > Vcore: +1.08 V (min = +0.00 V, max = +1.74 V) > in1: +1.03 V (min = +0.00 V, max = +0.00 V) ALARM Possibly 12V (*12) > AVCC: +3.33 V (min = +2.98 V, max = +3.63 V) > +3.3V: +3.33 V (min = +2.98 V, max = +3.63 V) > in4: +1.39 V (min = +0.00 V, max = +0.00 V) ALARM > in5: +1.86 V (min = +0.00 V, max = +0.00 V) ALARM No idea what in4/in5 might be. > in6: +1.66 V (min = +0.00 V, max = +0.00 V) ALARM This one might be 5V (*3) Guenter > 3VSB: +3.44 V (min = +2.98 V, max = +3.63 V) > Vbat: +3.39 V (min = +2.70 V, max = +3.30 V) ALARM > fan1: 0 RPM (min = 0 RPM, div = 128) > fan2: 4963 RPM (min = 0 RPM, div = 8) ALARM > fan3: 0 RPM (min = 0 RPM, div = 128) > fan4: 0 RPM (div = 128) > SYSTIN: +51.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = > thermistor > CPUTIN: +45.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > AUXTIN: -9.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > cpu0_vid: +0.000 V > > k10temp-pci-00c3 > Adapter: PCI adapter > temp1: +58.0°C (high = +70.0°C, crit = +75.0°C) > > _______________________________________________ > lm-sensors mailing list > lm-sensors@xxxxxxxxxxxxxx > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
