Hello, Lm-sensors. Sending report about using standalone driver for IT8721F, IT8758E at Ubuntu 9.10 with kernel 2.6.31.12 with motherboard Foxconn D42S. I was unable to build just driver from sources, so i put it into my kernel sources: replace original drivers/hwmon/it87.c with new one. Next i compile and install kernel and found a problem: > # modprobe it87 > FATAL: Error inserting it87 (/lib/modules/***/drivers/hwmon/it87.ko): Device or resource busy But found a solution: > Basically, you need to add a new kernel line in your menu.lst to fix > this behavior. > acpi_enforce_resources=lax And it was good for me. Now the sensors give me correct output, but without names (temp1, fan1 and so on), so i had to edit /etc/sensors.conf and now the output is correct for me (temp and fans) > # sensors > acpitz-virtual-0 > Adapter: Virtual device > temp1: +55.0°C (crit = +85.0°C) > > it8721-isa-0a10 > Adapter: ISA adapter > in0: +2.76 V (min = +1.38 V, max = +2.05 V) ALARM > in1: +2.80 V (min = +1.30 V, max = +3.05 V) > in2: +2.06 V (min = +0.66 V, max = +2.98 V) > +3.3V: +3.41 V (min = +5.66 V, max = +1.87 V) ALARM > in4: +1.87 V (min = +2.82 V, max = +2.60 V) ALARM > in5: +1.04 V (min = +1.68 V, max = +1.02 V) ALARM > in6: +2.23 V (min = +1.43 V, max = +1.48 V) ALARM > 3VSB: +3.24 V (min = +4.37 V, max = +0.72 V) ALARM > Vbat: +3.05 V > CPU Fan: 903 RPM (min = 14 RPM) > Sys Fan: 0 RPM (min = 12 RPM) ALARM > CPU Temp: +54.0°C (low = -107.0°C, high = +80.0°C) sensor = thermal diode > temp2: -56.0°C (low = -10.0°C, high = +127.0°C) sensor = thermal diode > M/B Temp: +35.0°C (low = -61.0°C, high = +127.0°C) sensor =thermal diode For more information look at my blog post http://www.aleksandr.ru/blog/ubuntu_9_10___lm_sensors___ite_it8721f_it8758e.html (in Russian language) -- Rebel mailto:atr_temp@xxxxxxx _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
