Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Documentation/hwmon/f71882fg | 4 ++++
drivers/hwmon/Kconfig | 1 +
drivers/hwmon/f71882fg.c | 32 +++++++++++++++++++-------------
3 files changed, 24 insertions(+), 13 deletions(-)
--- linux-2.6.39-rc0.orig/drivers/hwmon/f71882fg.c 2011-03-24 08:15:44.000000000 +0100
+++ linux-2.6.39-rc0/drivers/hwmon/f71882fg.c 2011-03-25 13:37:32.000000000 +0100
@@ -55,6 +55,7 @@
#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F71889E_ID 0x0909 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
+#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define REGION_LENGTH 8
#define ADDR_REG_OFFSET 5
@@ -106,7 +107,7 @@ module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
enum chips { f71808e, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
- f71889ed, f8000 };
+ f71889ed, f8000, f81865f };
static const char *f71882fg_names[] = {
"f71808e",
@@ -117,9 +118,10 @@ static const char *f71882fg_names[] = {
"f71889fg", /* f81801u too, same id */
"f71889ed",
"f8000",
+ "f81865f",
};
-static const char f71882fg_has_in[8][F71882FG_MAX_INS] = {
+static const char f71882fg_has_in[9][F71882FG_MAX_INS] = {
[f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
[f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
[f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
@@ -128,9 +130,10 @@ static const char f71882fg_has_in[8][F71
[f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
+ [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0 },
};
-static const char f71882fg_has_in1_alarm[8] = {
+static const char f71882fg_has_in1_alarm[9] = {
[f71808e] = 0,
[f71858fg] = 0,
[f71862fg] = 0,
@@ -139,9 +142,10 @@ static const char f71882fg_has_in1_alarm
[f71889fg] = 1,
[f71889ed] = 1,
[f8000] = 0,
+ [f81865f] = 1,
};
-static const char f71882fg_has_beep[8] = {
+static const char f71882fg_has_beep[9] = {
[f71808e] = 0,
[f71858fg] = 0,
[f71862fg] = 1,
@@ -150,9 +154,10 @@ static const char f71882fg_has_beep[8] =
[f71889fg] = 1,
[f71889ed] = 1,
[f8000] = 0,
+ [f81865f] = 1,
};
-static const char f71882fg_nr_fans[8] = {
+static const char f71882fg_nr_fans[9] = {
[f71808e] = 3,
[f71858fg] = 3,
[f71862fg] = 3,
@@ -161,9 +166,10 @@ static const char f71882fg_nr_fans[8] =
[f71889fg] = 3,
[f71889ed] = 3,
[f8000] = 3,
+ [f81865f] = 2,
};
-static const char f71882fg_nr_temps[8] = {
+static const char f71882fg_nr_temps[9] = {
[f71808e] = 2,
[f71858fg] = 3,
[f71862fg] = 3,
@@ -172,6 +178,7 @@ static const char f71882fg_nr_temps[8] =
[f71889fg] = 3,
[f71889ed] = 3,
[f8000] = 3,
+ [f81865f] = 2,
};
static struct platform_device *f71882fg_pdev;
@@ -2186,16 +2193,12 @@ static int __devinit f71882fg_probe(stru
case f71862fg:
err = (data->pwm_enable & 0x15) != 0x15;
break;
- case f71808e:
- case f71869:
- case f71882fg:
- case f71889fg:
- case f71889ed:
- err = 0;
- break;
case f8000:
err = data->pwm_enable & 0x20;
break;
+ default:
+ err = 0;
+ break;
}
if (err) {
dev_err(&pdev->dev,
@@ -2433,6 +2436,9 @@ static int __init f71882fg_find(int sioa
case SIO_F8000_ID:
sio_data->type = f8000;
break;
+ case SIO_F81865_ID:
+ sio_data->type = f81865f;
+ break;
default:
pr_info("Unsupported Fintek device: %04x\n",
(unsigned int)devid);
--- linux-2.6.39-rc0.orig/Documentation/hwmon/f71882fg 2011-03-24 08:15:44.000000000 +0100
+++ linux-2.6.39-rc0/Documentation/hwmon/f71882fg 2011-03-25 13:38:13.000000000 +0100
@@ -41,6 +41,10 @@ Supported chips:
Note: This is the 64-pin variant of the F71889FG, they have the
same device ID and are fully compatible as far as hardware
monitoring is concerned.
+ * Fintek F81865F
+ Prefix: 'f81865f'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Available from the Fintek website
Author: Hans de Goede <hdegoede@xxxxxxxxxx>
--- linux-2.6.39-rc0.orig/drivers/hwmon/Kconfig 2011-03-24 08:16:44.000000000 +0100
+++ linux-2.6.39-rc0/drivers/hwmon/Kconfig 2011-03-25 13:38:41.000000000 +0100
@@ -330,6 +330,7 @@ config SENSORS_F71882FG
F71889FG/ED
F8000
F81801U
+ F81865F
This driver can also be built as a module. If so, the module
will be called f71882fg.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
