|
Hello, I have a Supermicro H8QM3-2 motherboard running Opteron 8356 CPUs. It is running Fedora 14 x86_64 using lm_sensors 3.2.0. For thermal CPU monitoring the board uses Winbond 83627HG thermal diodes. When I run sensor-detect they are picked up and put into the config. When I run sensors, the values for them are way low. They report 8C, 3C, 5C, and 9C when all four CPUs are under full load. I know that can not be accurate or even in the ballpark. Are these sensors fully support? If so, what information would you need to help figure out why they are reporting so low. Thanks, Keith |
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
