Just spend a couple of hours finetuning this, and i thought i'd be nice to share ##/etc/sensors.d/zbox-hd-id-11 chip "w83667hg-isa-0a10" # Voltages label in0 "Vcore" label in1 "RAM" label in2 "AVCC" label in3 "+3.3V" label in4 "Chipset" label in5 "+1.5V" label in6 "3VSB" label in7 "VBatt" set in0_min 1.1 * 0.90 set in0_max 1.1 * 1.10 set in1_min 1.9 * 0.90 set in1_max 1.9 * 1.10 set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 3.3 * 0.90 set in3_max 3.3 * 1.10 set in4_min 1.1 * 0.90 set in4_max 1.1 * 1.10 set in5_min 1.5 * 0.90 set in5_max 1.5 * 1.10 # Fans # Only fan2 is used in this barebone. ignore fan1 label fan2 "Case Fan" ignore fan3 ignore fan4 ignore fan5 set fan2_min 800 # Temperatures #unfortunately i'm not sure if temp3 is ram label temp1 "GPU Temp" label temp2 "CPU Temp" label temp3 "RAM Temp" #this always returns a 0 reading ignore cpu0_vid set temp1_max 50 set temp1_max_hyst 40 set temp2_max 75 set temp2_max_hyst 60 set temp3_max 35 set temp3_max_hyst 30 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
