Hi Hans,
On Thu, Mar 10, 2011 at 09:27:52AM -0500, Hans de Goede wrote:
> SMSC SCH5627 Super I/O chips include complete hardware monitoring
> capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperature
> sensors.
>
> The hardware monitoring part of the SMSC SCH5627 is accessed by talking
> through an embedded microcontroller. An application note describing the
> protocol for communicating with the microcontroller is available upon
> request. Please mail me if you want a copy.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Looks pretty good. Some formatting issues, plus and a potential division by zero.
> ---
> Documentation/hwmon/sch5627 | 23 ++
> drivers/hwmon/Kconfig | 9 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/sch5627.c | 833 +++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 866 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/hwmon/sch5627
> create mode 100644 drivers/hwmon/sch5627.c
>
> diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627
> new file mode 100644
> index 0000000..93ff3f5
> --- /dev/null
> +++ b/Documentation/hwmon/sch5627
> @@ -0,0 +1,23 @@
> +Kernel driver sch5627
> +=====================
> +
> +Supported chips:
> + * SMSC SCH5627
> + Prefix: 'sch5627'
> + Addresses scanned: none, address read from Super I/O config space
> + Datasheet: Application Note available upon request
> +
> +Author: Hans de Goede <hdegoede@xxxxxxxxxx>
> +
> +
> +Description
> +-----------
> +
> +SMSC SCH5627 Super I/O chips include complete hardware monitoring
> +capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperature
> +sensors.
> +
> +The hardware monitoring part of the SMSC SCH5627 is accessed by talking
> +through an embedded microcontroller. An application note describing the
> +protocol for communicating with the microcontroller is available upon
> +request. Please mail me if you want a copy.
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 773e484..ec6d0fb 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -871,6 +871,15 @@ config SENSORS_SMSC47B397
> This driver can also be built as a module. If so, the module
> will be called smsc47b397.
>
> +config SENSORS_SCH5627
> + tristate "SMSC SCH5627"
> + help
> + If you say yes here you get support for the hardware monitoring
> + features of the SMSC SCH5627 Super-I/O chip.
> +
> + This driver can also be built as a module. If so, the module
> + will be called sch5627.
> +
> config SENSORS_ADS7828
> tristate "Texas Instruments ADS7828"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index dde02d9..8b411b3 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
> +obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
> obj-$(CONFIG_SENSORS_SHT15) += sht15.o
> obj-$(CONFIG_SENSORS_SHT21) += sht21.o
> obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
> diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
> new file mode 100644
> index 0000000..9488ec5
> --- /dev/null
> +++ b/drivers/hwmon/sch5627.c
> @@ -0,0 +1,833 @@
> +/***************************************************************************
> + * Copyright (C) 2010-2011 Hans de Goede <hdegoede@xxxxxxxxxx> *
> + * *
> + * This program is free software; you can redistribute it and/or modify *
> + * it under the terms of the GNU General Public License as published by *
> + * the Free Software Foundation; either version 2 of the License, or *
> + * (at your option) any later version. *
> + * *
> + * This program is distributed in the hope that it will be useful, *
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of *
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
> + * GNU General Public License for more details. *
> + * *
> + * You should have received a copy of the GNU General Public License *
> + * along with this program; if not, write to the *
> + * Free Software Foundation, Inc., *
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
> + ***************************************************************************/
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/jiffies.h>
> +#include <linux/platform_device.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +#include <linux/io.h>
> +#include <linux/acpi.h>
> +
> +#define DRVNAME "sch5627"
> +
> +#define SIO_SCH5627_EM_LD 0x0C /* Embedded Microcontroller LD */
> +#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */
> +#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */
> +
> +#define SIO_REG_LDSEL 0x07 /* Logical device select */
> +#define SIO_REG_DEVID 0x20 /* Device ID */
> +#define SIO_REG_ENABLE 0x30 /* Logical device enable */
> +#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */
> +
> +#define SIO_SCH5627_ID 0xC6 /* Chipset ID */
> +
> +#define REGION_LENGTH 9
> +
> +#define SCH5627_HWMON_ID 0xa5
> +#define SCH5627_COMPANY_ID 0x5c
> +#define SCH5627_PRIMARY_ID 0xa0
> +
> +#define SCH5627_REG_BUILD_CODE 0x39
> +#define SCH5627_REG_BUILD_ID 0x3a
> +#define SCH5627_REG_HWMON_ID 0x3c
> +#define SCH5627_REG_HWMON_REV 0x3d
> +#define SCH5627_REG_COMPANY_ID 0x3e
> +#define SCH5627_REG_PRIMARY_ID 0x3f
> +#define SCH5627_REG_CTRL 0x40
> +
> +#define SCH5627_NO_TEMPS 8
> +#define SCH5627_NO_FANS 4
> +#define SCH5627_NO_IN 5
> +
> +static const int SCH5627_REG_TEMP_MSB[SCH5627_NO_TEMPS] = {
> + 0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181 };
> +static const int SCH5627_REG_TEMP_LSN[SCH5627_NO_TEMPS] = {
> + 0xE2, 0xE1, 0xE1, 0xE5, 0xE5, 0xE6, 0x182, 0x182 };
> +static const int SCH5627_REG_TEMP_HIGH_NIBBLE[SCH5627_NO_TEMPS] = {
> + 0, 0, 1, 1, 0, 0, 0, 1 };
> +static const int SCH5627_REG_TEMP_HIGH[SCH5627_NO_TEMPS] = {
> + 0x61, 0x57, 0x59, 0x5B, 0x5D, 0x5F, 0x184, 0x186 };
> +static const int SCH5627_REG_TEMP_ABS[SCH5627_NO_TEMPS] = {
> + 0x9B, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x1A8, 0x1A9 };
> +
> +static const int SCH5627_REG_FAN[SCH5627_NO_FANS] = {
> + 0x2C, 0x2E, 0x30, 0x32 };
> +static const int SCH5627_REG_FAN_MIN[SCH5627_NO_FANS] = {
> + 0x62, 0x64, 0x66, 0x68 };
> +
> +static const int SCH5627_REG_IN_MSB[SCH5627_NO_IN] = {
> + 0x22, 0x23, 0x24, 0x25, 0x189 };
> +static const int SCH5627_REG_IN_LSN[SCH5627_NO_IN] = {
> + 0xE4, 0xE4, 0xE3, 0xE3, 0x18A };
> +static const int SCH5627_REG_IN_HIGH_NIBBLE[SCH5627_NO_IN] = {
> + 1, 0, 1, 0, 1 };
> +static const int SCH5627_REG_IN_FACTOR[SCH5627_NO_IN] = {
> + 10745, 3660, 9765, 10745, 3660 };
> +static const char * const SCH5627_IN_LABELS[SCH5627_NO_IN] = {
> + "VCC", "VTT", "VBAT", "VTR", "V_IN" };
> +
> +struct sch5627_data {
> + unsigned short addr;
> + struct device *hwmon_dev;
> + u8 temp_max[SCH5627_NO_TEMPS];
> + u8 temp_crit[SCH5627_NO_TEMPS];
> + u16 fan_min[SCH5627_NO_FANS];
> +
> + struct mutex update_lock;
> + char valid; /* !=0 if following fields are valid */
> + unsigned long last_updated; /* In jiffies */
> + u16 temp[SCH5627_NO_TEMPS];
> + u16 fan[SCH5627_NO_FANS];
> + u16 in[SCH5627_NO_IN];
> +};
> +
> +static int sch5627_remove(struct platform_device *pdev);
> +
> +static struct platform_device *sch5627_pdev;
> +
> +/* Super I/O functions */
> +static inline int superio_inb(int base, int reg)
> +{
> + outb(reg, base);
> + return inb(base + 1);
> +}
> +
> +static inline int superio_enter(int base)
> +{
> + /* Don't step on other drivers' I/O space by accident */
> + if (!request_muxed_region(base, 2, DRVNAME)) {
> + printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
> + base);
Please use pr_err() instead of printk(), and something like
#define pr_fmt(fmt) DRVNAME ": " fmt
So it should be something like
pr_err("I/O address 0x%04x already in use\n", base);
> + return -EBUSY;
> + }
> +
> + outb(SIO_UNLOCK_KEY, base);
> +
> + return 0;
> +}
> +
> +static inline void superio_select(int base, int ld)
> +{
> + outb(SIO_REG_LDSEL, base);
> + outb(ld, base + 1);
> +}
> +
> +static inline void superio_exit(int base)
> +{
> + outb(SIO_LOCK_KEY, base);
> + release_region(base, 2);
> +}
> +
> +static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg)
> +{
> + u8 val;
> + int i;
> + /* According to SMSC for the commands we use the maximum time for
> + the EM to respond is 15 ms, but testing shows in practice it
> + responds within 15-32 reads, so we first busy poll, and if
> + that fails sleep a bit and try again until we are way past
> + the 15 ms maximum response time */
Please use the "officiel" format for multi-line comments
/*
* This is a comment
*/
> + const int max_busy_polls = 64;
> + const int max_lazy_polls = 32;
> +
> + /* (Optional) Write-Clear the EC to Host Mailbox Register */
> + val = inb(data->addr + 1);
> + outb(val, data->addr + 1);
> +
> + /* Set Mailbox Address Pointer to first location in Region 1 */
> + outb(0x00, data->addr + 2);
> + outb(0x80, data->addr + 3);
> +
> + /* Write Request Packet Header */
> + outb(0x02, data->addr + 4); /* Access Type: VREG read */
> + outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */
> + outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */
> +
> + /* Write Address field */
> + outb(reg & 0xff, data->addr + 6);
> + outb(reg >> 8, data->addr + 7);
> +
> + /* Execute the Random Access Command */
> + outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */
> +
> + /* EM Interface Polling "Algorithm" */
> + for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
> + if (i>= max_busy_polls)
> + msleep(1);
> + /* Read Interrupt source Register */
> + val = inb(data->addr + 8);
> + /* Write Clear the interrupt source bits */
> + if (val)
> + outb(val, data->addr + 8);
> + /* Command Completed ? */
> + if (val & 0x01)
> + break;
> + }
> + if (i == max_busy_polls + max_lazy_polls) {
> + printk(KERN_ERR DRVNAME ": Max retries exceeded reading "
> + "virtual register 0x%04x (1)\n", (unsigned int)reg);
> + return -EIO;
> + }
> +
> + /* According to SMSC we may need to retry this, but sofar I've always
> + seen this succeed in 1 try */
> + for (i = 0; i < max_busy_polls; i++) {
> + /* Read EC-to-Host Register */
> + val = inb(data->addr + 1);
> + /* Command Completed ? */
> + if (val == 0x01)
> + break;
> +
> + printk(KERN_WARNING DRVNAME ": EC reports: %02x reading "
pr_warn()
> + "virtual register 0x%04x\n",
> + (unsigned int)val, (unsigned int)reg);
> + }
> + if (i == max_busy_polls) {
> + printk(KERN_ERR DRVNAME ": Max retries exceeded reading "
> + "virtual register 0x%04x (2)\n", (unsigned int)reg);
> + return -EIO;
> + }
> +
> + /* Read Data from Mailbox */
> + return inb(data->addr + 4);
> +}
> +
> +static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg)
> +{
> + int lsb, msb;
> +
> + /* Read LSB first, this will cause the matching MSB to be latched */
> + lsb = sch5627_read_virtual_reg(data, reg);
> + if (lsb < 0)
> + return lsb;
> +
> + msb = sch5627_read_virtual_reg(data, reg + 1);
> + if (msb < 0)
> + return msb;
> +
> + return lsb | (msb << 8);
> +}
> +
> +static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg,
> + u16 lsn_reg, int high_nibble)
> +{
> + int msb, lsn = -1;
> +
> + /* Read MSB first, this will cause the matching LSN to be latched */
> + msb = sch5627_read_virtual_reg(data, msb_reg);
> + if (msb < 0)
> + return msb;
> +
> + lsn = sch5627_read_virtual_reg(data, lsn_reg);
> + if (lsn < 0)
> + return lsn;
> +
> + if (high_nibble)
> + return (msb << 4) | (lsn >> 4);
> + else
> + return (msb << 4) | (lsn & 0x0f);
> +}
> +
> +static struct sch5627_data *sch5627_update_device(struct device *dev)
> +{
> + struct sch5627_data *data = dev_get_drvdata(dev);
> + struct sch5627_data *ret = data;
> + int i, val;
> +
> + mutex_lock(&data->update_lock);
> +
> + /* Update every second */
> + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
> + for (i = 0; i < SCH5627_NO_TEMPS; i++) {
> + val = sch5627_read_virtual_reg12(data,
> + SCH5627_REG_TEMP_MSB[i],
> + SCH5627_REG_TEMP_LSN[i],
> + SCH5627_REG_TEMP_HIGH_NIBBLE[i]);
> + if (unlikely(val < 0)) {
> + ret = ERR_PTR(val);
> + goto abort;
> + }
> + data->temp[i] = val;
> + }
> +
> + for (i = 0; i < SCH5627_NO_FANS; i++) {
> + val = sch5627_read_virtual_reg16(data,
> + SCH5627_REG_FAN[i]);
> + if (unlikely(val < 0)) {
> + ret = ERR_PTR(val);
> + goto abort;
> + }
> + data->fan[i] = val;
> + }
> +
> + for (i = 0; i < SCH5627_NO_IN; i++) {
> + val = sch5627_read_virtual_reg12(data,
> + SCH5627_REG_IN_MSB[i],
> + SCH5627_REG_IN_LSN[i],
> + SCH5627_REG_IN_HIGH_NIBBLE[i]);
> + if (unlikely(val < 0)) {
> + ret = ERR_PTR(val);
> + goto abort;
> + }
> + data->in[i] = val;
> + }
> +
> + data->last_updated = jiffies;
> + data->valid = 1;
> + }
> +abort:
> + mutex_unlock(&data->update_lock);
> + return ret;
> +}
> +
> +static int reg_to_temp(u16 reg)
> +{
> + return (reg * 625) / 10 - 64000;
> +}
> +
> +static int reg_to_temp_limit(u8 reg)
> +{
> + return (reg - 64) * 1000;
> +}
> +
> +static int reg_to_rpm(u16 reg)
> +{
> + return 5400540 / reg;
> +}
Unless I am missing sonething, there is no guarantee that reg is != 0.
> +
> +static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
> + char *buf)
> +{
> + return sprintf(buf, "%s\n", DRVNAME);
> +}
> +
> +static ssize_t show_temp(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = sch5627_update_device(dev);
> + int val;
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + val = reg_to_temp(data->temp[attr->index]);
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t show_temp_fault(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = sch5627_update_device(dev);
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + if (data->temp[attr->index] == 0)
> + return snprintf(buf, PAGE_SIZE, "1\n");
> + else
> + return snprintf(buf, PAGE_SIZE, "0\n");
> +}
> +
> +static ssize_t show_temp_max(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = dev_get_drvdata(dev);
> + int val;
> +
> + val = reg_to_temp_limit(data->temp_max[attr->index]);
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t show_temp_crit(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = dev_get_drvdata(dev);
> + int val;
> +
> + val = reg_to_temp_limit(data->temp_crit[attr->index]);
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t show_fan(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = sch5627_update_device(dev);
> + int val;
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + val = reg_to_rpm(data->fan[attr->index]);
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t show_fan_fault(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = sch5627_update_device(dev);
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + if (data->fan[attr->index] == 0xffff)
> + return snprintf(buf, PAGE_SIZE, "1\n");
> + else
> + return snprintf(buf, PAGE_SIZE, "0\n");
> +}
> +
> +static ssize_t show_fan_min(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = dev_get_drvdata(dev);
> + int val = reg_to_rpm(data->fan_min[attr->index]);
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t show_in(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + struct sch5627_data *data = sch5627_update_device(dev);
> + int val;
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + val = (data->in[attr->index] * SCH5627_REG_IN_FACTOR[attr->index]) /
> + 10000;
> + return snprintf(buf, PAGE_SIZE, "%d\n", val);
> +}
> +
> +static ssize_t show_in_label(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> + return snprintf(buf, PAGE_SIZE, "%s\n",
> + SCH5627_IN_LABELS[attr->index]);
> +}
> +
> +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
> +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
> +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
> +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
> +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
> +static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5);
> +static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6);
> +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
> +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
> +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
> +static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
> +static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
> +static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_temp_fault, NULL, 4);
> +static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_temp_fault, NULL, 5);
> +static SENSOR_DEVICE_ATTR(temp7_fault, S_IRUGO, show_temp_fault, NULL, 6);
> +static SENSOR_DEVICE_ATTR(temp8_fault, S_IRUGO, show_temp_fault, NULL, 7);
> +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL, 0);
> +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, NULL, 1);
> +static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, NULL, 2);
> +static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, NULL, 3);
> +static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, NULL, 4);
> +static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_max, NULL, 5);
> +static SENSOR_DEVICE_ATTR(temp7_max, S_IRUGO, show_temp_max, NULL, 6);
> +static SENSOR_DEVICE_ATTR(temp8_max, S_IRUGO, show_temp_max, NULL, 7);
> +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
> +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 1);
> +static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 2);
> +static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 3);
> +static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 4);
> +static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 5);
> +static SENSOR_DEVICE_ATTR(temp7_crit, S_IRUGO, show_temp_crit, NULL, 6);
> +static SENSOR_DEVICE_ATTR(temp8_crit, S_IRUGO, show_temp_crit, NULL, 7);
> +
> +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
> +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
> +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
> +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
> +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
> +static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
> +static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
> +static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
> +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan_min, NULL, 0);
> +static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan_min, NULL, 1);
> +static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO, show_fan_min, NULL, 2);
> +static SENSOR_DEVICE_ATTR(fan4_min, S_IRUGO, show_fan_min, NULL, 3);
> +
> +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
> +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
> +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
> +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
> +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
> +static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_in_label, NULL, 0);
> +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_in_label, NULL, 1);
> +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_in_label, NULL, 2);
> +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_in_label, NULL, 3);
> +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_in_label, NULL, 4);
> +
> +static struct attribute *sch5627_attributes[] = {
> + &dev_attr_name.attr,
> +
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + &sensor_dev_attr_temp2_input.dev_attr.attr,
> + &sensor_dev_attr_temp3_input.dev_attr.attr,
> + &sensor_dev_attr_temp4_input.dev_attr.attr,
> + &sensor_dev_attr_temp5_input.dev_attr.attr,
> + &sensor_dev_attr_temp6_input.dev_attr.attr,
> + &sensor_dev_attr_temp7_input.dev_attr.attr,
> + &sensor_dev_attr_temp8_input.dev_attr.attr,
> + &sensor_dev_attr_temp1_fault.dev_attr.attr,
> + &sensor_dev_attr_temp2_fault.dev_attr.attr,
> + &sensor_dev_attr_temp3_fault.dev_attr.attr,
> + &sensor_dev_attr_temp4_fault.dev_attr.attr,
> + &sensor_dev_attr_temp5_fault.dev_attr.attr,
> + &sensor_dev_attr_temp6_fault.dev_attr.attr,
> + &sensor_dev_attr_temp7_fault.dev_attr.attr,
> + &sensor_dev_attr_temp8_fault.dev_attr.attr,
> + &sensor_dev_attr_temp1_max.dev_attr.attr,
> + &sensor_dev_attr_temp2_max.dev_attr.attr,
> + &sensor_dev_attr_temp3_max.dev_attr.attr,
> + &sensor_dev_attr_temp4_max.dev_attr.attr,
> + &sensor_dev_attr_temp5_max.dev_attr.attr,
> + &sensor_dev_attr_temp6_max.dev_attr.attr,
> + &sensor_dev_attr_temp7_max.dev_attr.attr,
> + &sensor_dev_attr_temp8_max.dev_attr.attr,
> + &sensor_dev_attr_temp1_crit.dev_attr.attr,
> + &sensor_dev_attr_temp2_crit.dev_attr.attr,
> + &sensor_dev_attr_temp3_crit.dev_attr.attr,
> + &sensor_dev_attr_temp4_crit.dev_attr.attr,
> + &sensor_dev_attr_temp5_crit.dev_attr.attr,
> + &sensor_dev_attr_temp6_crit.dev_attr.attr,
> + &sensor_dev_attr_temp7_crit.dev_attr.attr,
> + &sensor_dev_attr_temp8_crit.dev_attr.attr,
> +
> + &sensor_dev_attr_fan1_input.dev_attr.attr,
> + &sensor_dev_attr_fan2_input.dev_attr.attr,
> + &sensor_dev_attr_fan3_input.dev_attr.attr,
> + &sensor_dev_attr_fan4_input.dev_attr.attr,
> + &sensor_dev_attr_fan1_fault.dev_attr.attr,
> + &sensor_dev_attr_fan2_fault.dev_attr.attr,
> + &sensor_dev_attr_fan3_fault.dev_attr.attr,
> + &sensor_dev_attr_fan4_fault.dev_attr.attr,
> + &sensor_dev_attr_fan1_min.dev_attr.attr,
> + &sensor_dev_attr_fan2_min.dev_attr.attr,
> + &sensor_dev_attr_fan3_min.dev_attr.attr,
> + &sensor_dev_attr_fan4_min.dev_attr.attr,
> +
> + &sensor_dev_attr_in0_input.dev_attr.attr,
> + &sensor_dev_attr_in1_input.dev_attr.attr,
> + &sensor_dev_attr_in2_input.dev_attr.attr,
> + &sensor_dev_attr_in3_input.dev_attr.attr,
> + &sensor_dev_attr_in4_input.dev_attr.attr,
> + &sensor_dev_attr_in0_label.dev_attr.attr,
> + &sensor_dev_attr_in1_label.dev_attr.attr,
> + &sensor_dev_attr_in2_label.dev_attr.attr,
> + &sensor_dev_attr_in3_label.dev_attr.attr,
> + &sensor_dev_attr_in4_label.dev_attr.attr,
> +
> + NULL
> +};
> +
> +static const struct attribute_group sch5627_group = {
> + .attrs = sch5627_attributes,
> +};
> +
> +static int __devinit sch5627_probe(struct platform_device *pdev)
> +{
> + struct sch5627_data *data;
> + int i, err, build_code, build_id, hwmon_rev, val;
> +
> + data = kzalloc(sizeof(struct sch5627_data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
> + mutex_init(&data->update_lock);
> + platform_set_drvdata(pdev, data);
> +
> + val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + if (val != SCH5627_HWMON_ID) {
> + printk(KERN_ERR DRVNAME
> + ": invalid hwmon id: %02X (expected %02X)\n",
> + val, SCH5627_HWMON_ID);
> + err = -ENODEV;
> + goto error;
> + }
> +
> + val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + if (val != SCH5627_COMPANY_ID) {
> + printk(KERN_ERR DRVNAME
> + ": invalid company id: %02X (expected %02X)\n",
> + val, SCH5627_COMPANY_ID);
> + err = -ENODEV;
> + goto error;
> + }
> +
> + val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + if (val != SCH5627_PRIMARY_ID) {
> + printk(KERN_ERR DRVNAME
> + ": invalid primary id: %02X (expected %02X)\n",
> + val, SCH5627_PRIMARY_ID);
> + err = -ENODEV;
> + goto error;
> + }
> +
> + build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE);
> + if (build_code < 0) {
> + err = build_code;
> + goto error;
> + }
> +
> + build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID);
> + if (build_id < 0) {
> + err = build_id;
> + goto error;
> + }
> +
> + hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV);
> + if (hwmon_rev < 0) {
> + err = hwmon_rev;
> + goto error;
> + }
> +
> + val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + if (!(val & 0x01)) {
> + printk(KERN_ERR DRVNAME ": hardware monitoring not enabled\n");
> + err = -ENODEV;
> + goto error;
> + }
> +
> + /* Read limits, we do this only once as reading a register on
> + the sch5627 is quite expensive (and they don't change) */
multi-line comment format
> + for (i = 0; i < SCH5627_NO_TEMPS; i++) {
> + /* Note what SMSC calls ABS, is what lm_sensors calls max
> + (aka high), and HIGH is what lm_sensors calls crit. */
multi-line comment format
> + val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + data->temp_max[i] = val;
> +
> + val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + data->temp_crit[i] = val;
> + }
> + for (i = 0; i < SCH5627_NO_FANS; i++) {
> + val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]);
> + if (val < 0) {
> + err = val;
> + goto error;
> + }
> + data->fan_min[i] = val;
> + }
> +
> + printk(KERN_INFO DRVNAME
pr_info();
> + ": firmware build: code %02X, id %04X. hwmon: rev %02X.\n",
> + build_code, build_id, hwmon_rev);
> +
> + /* Register sysfs interface files */
> + err = sysfs_create_group(&pdev->dev.kobj, &sch5627_group);
> + if (err)
> + goto error;
> +
> + data->hwmon_dev = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(data->hwmon_dev)) {
> + err = PTR_ERR(data->hwmon_dev);
> + data->hwmon_dev = NULL;
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + sch5627_remove(pdev);
> + return err;
> +}
> +
> +static int sch5627_remove(struct platform_device *pdev)
> +{
> + struct sch5627_data *data = platform_get_drvdata(pdev);
> +
> + platform_set_drvdata(pdev, NULL);
> + if (data->hwmon_dev)
> + hwmon_device_unregister(data->hwmon_dev);
> +
> + sysfs_remove_group(&pdev->dev.kobj, &sch5627_group);
> + kfree(data);
> +
> + return 0;
> +}
> +
> +static int __init sch5627_find(int sioaddr, unsigned short *address)
> +{
> + u8 devid;
> + int err = superio_enter(sioaddr);
> + if (err)
> + return err;
> +
> + devid = superio_inb(sioaddr, SIO_REG_DEVID);
> + if (devid != SIO_SCH5627_ID) {
> + printk(KERN_INFO DRVNAME ": Unsupported device id: %02x\n",
> + (unsigned int)devid);
> + err = -ENODEV;
> + goto exit;
> + }
> +
> + superio_select(sioaddr, SIO_SCH5627_EM_LD);
> +
> + if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
> + printk(KERN_WARNING DRVNAME ": Device not activated\n");
> + err = -ENODEV;
> + goto exit;
> + }
> +
> + /* Warning the order of the low / high byte is the other way around
> + as on most other superio devices!! */
> + *address = superio_inb(sioaddr, SIO_REG_ADDR) |
> + superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
> + if (*address == 0) {
> + printk(KERN_WARNING DRVNAME ": Base address not set\n");
> + err = -ENODEV;
> + goto exit;
> + }
> +
> + err = 0;
> + printk(KERN_INFO DRVNAME ": Found %s chip at %#x\n",
> + DRVNAME, (unsigned int)*address);
> +exit:
> + superio_exit(sioaddr);
> + return err;
> +}
> +
> +static int __init sch5627_device_add(unsigned short address)
> +{
> + struct resource res = {
> + .start = address,
> + .end = address + REGION_LENGTH - 1,
> + .flags = IORESOURCE_IO,
> + };
> + int err;
> +
> + sch5627_pdev = platform_device_alloc(DRVNAME, address);
> + if (!sch5627_pdev)
> + return -ENOMEM;
> +
> + res.name = sch5627_pdev->name;
> + err = acpi_check_resource_conflict(&res);
> + if (err)
> + goto exit_device_put;
> +
> + err = platform_device_add_resources(sch5627_pdev, &res, 1);
> + if (err) {
> + printk(KERN_ERR DRVNAME ": Device resource addition failed\n");
> + goto exit_device_put;
> + }
> +
> + err = platform_device_add(sch5627_pdev);
> + if (err) {
> + printk(KERN_ERR DRVNAME ": Device addition failed\n");
> + goto exit_device_put;
> + }
> +
> + return 0;
> +
> +exit_device_put:
> + platform_device_put(sch5627_pdev);
> +
> + return err;
> +}
> +
> +static struct platform_driver sch5627_driver = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = DRVNAME,
> + },
> + .probe = sch5627_probe,
> + .remove = sch5627_remove,
> +};
> +
> +static int __init sch5627_init(void)
> +{
> + int err = -ENODEV;
> + unsigned short address;
> +
> + if (sch5627_find(0x4e, &address) &&
> + sch5627_find(0x2e, &address))
One line should be ok.
> + goto exit;
> +
Doesn't need two lines.
> + err = platform_driver_register(&sch5627_driver);
> + if (err)
> + goto exit;
> +
> + err = sch5627_device_add(address);
> + if (err)
> + goto exit_driver;
> +
> + return 0;
> +
> +exit_driver:
> + platform_driver_unregister(&sch5627_driver);
> +exit:
> + return err;
> +}
> +
> +static void __exit sch5627_exit(void)
> +{
> + platform_device_unregister(sch5627_pdev);
> + platform_driver_unregister(&sch5627_driver);
> +}
> +
> +MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver");
> +MODULE_AUTHOR("Hans de Goede (hdegoede@xxxxxxxxxx)");
> +MODULE_LICENSE("GPL");
> +
> +module_init(sch5627_init);
> +module_exit(sch5627_exit);
> --
> 1.7.3.2
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
