We should mention ADS1115 support in all the appropriate places. Grep
for ADS1015 to get an idea.
From what I can see, the other changes could be
<<<< Addendum >>>>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9abcc6b..9b3e3e9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -856,7 +856,7 @@ config SENSORS_ADS1015
depends on I2C
help
If you say yes here you get support for Texas Instruments ADS1015
- 12-bit 4-input ADC device.
+ & ADS1115 12/16-bit 4-input ADC devices.
This driver can also be built as a module. If so, the module
will be called ads1015.
diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
index 85ffd77..e12fd1c 100644
--- a/Documentation/hwmon/ads1015
+++ b/Documentation/hwmon/ads1015
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'ads1015'
Datasheet: Publicly available at the Texas Instruments website :
http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+ * Texas Instruments ADS1115
+ Prefix: 'ads1115'
+ Datasheet: Publicly available at the Texas Instruments website :
+ http://focus.ti.com/lit/ds/symlink/ads1115.pdf
Authors:
Dirk Eibach, Guntermann & Drunck GmbH <eibach <at> gdsys.de>
@@ -13,9 +17,11 @@ Authors:
Description
-----------
-This driver implements support for the Texas Instruments ADS1015.
+This driver implements support for the Texas Instruments ADS1015 and
+ADS1115.
-This device is a 12-bit A-D converter with 4 inputs.
+ADS1015 is a 12-bit A-D converter with 4 inputs.
+ADS1115 is a 16-bit A-D converter with 4 inputs.
The inputs can be used single ended or in certain differential
combinations.
<<<< end of addendum >>>>
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
