Re: [PATCH] sensors-detect: Add detection for EMCD103 chip revisions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Updated subject for clarification.

On Fri, Feb 18, 2011 at 08:15:45AM -0500, Guenter Roeck wrote:
> Index: prog/detect/sensors-detect
> ===================================================================
> --- prog/detect/sensors-detect	(revision 5933)
> +++ prog/detect/sensors-detect	(working copy)
> @@ -547,11 +547,16 @@
>  		i2c_addrs => [0x2c..0x2e],
>  		i2c_detect => sub { lm85_detect(@_, 5); },
>  	}, {
> -		name => "SMSC EMC6D103",
> +		name => "SMSC EMC6D103 rev A0, A1",
>  		driver => "lm85",
>  		i2c_addrs => [0x2c..0x2e],
>  		i2c_detect => sub { lm85_detect(@_, 6); },
>  	}, {
> +		name => "SMSC EMC6D103 rev A2",
> +		driver => "to-be-written",	# lm85
> +		i2c_addrs => [0x2c..0x2e],
> +		i2c_detect => sub { lm85_detect(@_, 8); },
> +	}, {
>  		name => "Winbond WPCD377I",
>  		driver => "not-a-sensor",
>  		i2c_addrs => [0x2c..0x2e],
> @@ -4776,7 +4781,11 @@
>  		return if $verstep != 0x65;	# EMC6D102
>  	} elsif ($chip == 6) {
>  		return if $vendor != 0x5c;	# SMSC
> -		return if $verstep != 0x68;	# EMC6D103
> +		return if $verstep != 0x68	# EMC6D103 A0
> +		       && $verstep != 0x69;	# EMC6D103 A1
> +	} elsif ($chip == 8) {
> +		return if $vendor != 0x5c;	# SMSC
> +		return if $verstep != 0x6a;	# EMC6D103 A2
>  	}
>  
>  	if ($vendor == 0x41) {			# Analog Devices
> 
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux