On Sat, Feb 12, 2011 at 12:55 PM, Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> wrote: > On Sat, Feb 12, 2011 at 11:01:11AM -0500, Andrew Lutomirski wrote: > [ ... ] > > Actually, > >> fan2_min == 200 (div = 64): >> fan2_input == 138 (read at a different time, so may differ a little) >> >> [56013.556243] Reg 0029 = 99 >> [56013.556286] Reg 0630 = 0046 >> [56013.556453] Reg 0658 = 0089 >> >> fan2_min == 502 (div = 32): >> fan2_input == 0 (read at a different time, so may differ a little) >> >> [56085.471567] Reg 0029 = 00 >> [56085.471644] Reg 0632 = 0000 >> [56085.471804] Reg 0658 = 0000 > > Must have been blind. So the RPM register returns 0 as well. Not good. > Wonder what is going on. So far, the highest number I've been able to get out of the counter register is 0x2e8 by setting div == 16 and playing with the pwm. If I set div == 8, then I can't get much above 0x10b. I have no idea what's going on either. I tried writing 0x80 to 0x508 (which is supposed to turn the whole thing on), but the only bits that seem to stick are 0x7, so I have no idea what's going on. --Andy > > Guenter > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
