On Sun, 6 Feb 2011 20:50:05 -0800, Guenter Roeck wrote: > On Sun, Feb 06, 2011 at 10:50:02PM -0500, Andy Lutomirski wrote: > > On 02/05/2011 12:58 PM, Guenter Roeck wrote: > > > Hi, > > > > > > a standalone driver for W83667HG-I (NCT6771F, NCT6775F) and NCT6776F > > > is available for testing at http://roeck-us.net/linux/drivers/w83627ehf/. > > > > > > Please test and let me know if there are any problems. > > > > It appears to mostly work on an Intel DH67GD (nct6775). There are two > > issues: > > > > 1. The first time I ran 'sensors', my CPU fan showed 0 RPM instead of > > the correct value (~134). Running it again shows the correct value. > > > If you check the log, you might see a notice that the fan divisors were modified. > Can you check ? Note: if you set a proper fan_min value in your configuration file, "sensors -s" will set the right divisor directly so the first "sensors" will work. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
