Hi,
I just configured my QNAP TS-509 NAS and I'm happy to share the results
with you. Hopefully they find their way into the Wiki (I don't have an account).
I think the original QNAP firmware doesn't use lm-sensors, so I had to
try myself.
System: Debian Squeeze
Kernel: 2.6.32
Drivers: coretemp, it87
Board info:
Manufacturer: QNAP
Product Name: TS-509-Q025MB(T187)
Version: V1.00
Config:
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in0 " CPU Core"
label in1 " +1.80V"
label in2 " +3.30V"
label in3 " +5.00V"
label in4 " +12.00V"
label in5 " +1.50V"
label in6 " +1.05V"
label in7 " +1.20V"
label in8 " Vbat"
label temp1 "CPU Temp"
label temp2 "SysTemp1"
label temp3 "SysTemp2"
label fan2 " SysFan1"
compute in0 @ * (6 / 5), @ / (6 / 5)
compute in3 @ * (5 / 3), @ / (5 / 3)
compute in4 @ * (4 / 1), @ / (4 / 1)
set in0_max 1.25 * 1.05
set in0_min 1.25 * 0.95
set in1_max 1.8 * 1.05
set in1_min 1.8 * 0.95
set in2_max 3.3 * 1.05
set in2_min 3.3 * 0.95
set in3_max 5.0 * 1.05
set in3_min 5.0 * 0.95
set in4_max 12.0 * 1.05
set in4_min 12.0 * 0.95
set in5_max 1.5 * 1.05
set in5_min 1.5 * 0.95
set in6_max 1.05 * 1.05
set in6_min 1.05 * 0.95
set in7_max 1.2 * 1.05
set in7_min 1.2 * 0.95
set fan2_min 500
set temp1_max 55
set temp1_min 10
set temp2_max 60
set temp2_min 10
set temp3_max 55
set temp3_min 10
ignore fan1
ignore fan3
ignore fan4
ignore fan5
Some min and max values are a little arbitrary, and the calculation is
partly based on guessing. Change it if it doesn't work for you. If someone
has better data, please contribute!
Best regards,
hjb
--
Pro-Linux - Germany's largest volunteer Linux support site
http://www.pro-linux.de/ Public Key ID 0x3DDBDDEA
Attachment:
signature.asc
Description: Digital signature
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
